SPEED ENGINEERING 13570 Brake Cooling Kit for SUZUKI Swift (RZ / AZ)

Description SPEED ENGINEERING 13570 Brake Cooling Kit for SUZUKI Swift (RZ / AZ)

The SPEED ENGINEERING 13570 Brake Cooling Kit is designed for the SUZUKI Swift RZ / AZ. The system cools the brakes efficiently using a wear-free hose mounting system.

The air inlets replace the fog lights with plug-and-play air intakes to capture maximum airflow at the front of the vehicle. Their curvature supports collision-free hose installation, while wheel position has no effect on hose movement.

The cooling system mounts to the wishbone and directs airflow toward the centre of the brake disc / brake rotor regardless of wheel position. Installation uses existing locking pins and requires no permanent vehicle modifications.

Road Use: Motorsport parts are not approved for road use.

Fitment / Vehicle Compatibility Note: Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.

• Designed for the SUZUKI Swift RZ / AZ
• Plug-and-play air intakes replace the fog lights
• Wishbone-mounted air duct outlets direct airflow toward the centre of the brake disc / brake rotor
• Airflow direction and hose movement remain independent of wheel position

Specifications:

• Installation Position: Front axle
• Mounting: Wishbone-mounted air duct outlets with existing locking pins
• Hose Length: 2 metres each

Kit comes with:

• 1x left air duct outlet
• 1x right air duct outlet
• 2x air ducts for the air inlets
• 2x hoses, 2 metres each
• 4x mounting clamps
• 4x cable ties