HKS 34002-AK019 Optional Tail Tip Cover HI-POWER SPEC-L II (CARBON) for TOYOTA Yaris Cross (MXPJ10/MXPB10) Photo-0
HKS 34002-AK019 Optional Tail Tip Cover HI-POWER SPEC-L II (CARBON) for TOYOTA Yaris Cross (MXPJ10/MXPB10) Photo-1

HKS 34002-AK019 Optional Tail Tip Cover HI-POWER SPEC-L II (CARBON) for TOYOTA Yaris Cross (MXPJ10/MXPB10)

Sale priceAED 247.47

Tax included. Shipping calculated at checkout

HKSP/N: 34002-AK019
Quantity:

This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.

Pickup available at ATOMIC-SHOP UAE Usually ready in 1 hour

HKS 34002-AK019 Optional Tail Tip Cover HI-POWER SPEC-L II (CARBON) for TOYOTA Yaris Cross (MXPJ10/MXPB10)

ATOMIC-SHOP UAE

Pickup available, usually ready in 1 hour

26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates

+97143580877

ATOMIC-SHOP UAE (RABDAN Motorsport)

Pickup available, usually ready in 1 hour

14 10b St - Al Quoz Industrial Area 3
Dubai DU
United Arab Emirates

+971559861650

The new Hi-Power SPEC-L II is compatible with optional tail tip covers. There are three types of optional tail tip cover available.

  • Option finisher cover is the option part for Hi-Power SPEC-L II.
    Not compatible with the Hi-Power SPEC-L and Touring SPEC-L because the press-fitting nut for fixing the finisher cover might come off.
  • Please use the threadlocker (medium strength) when you attach the option finisher cover.
    (Recommended product: Loctite 243 Medium Strength Threadlockers)

How to replace the option finisher cover

  • Use the bolt of M4, P=0.7, L=6 (Material: SUS304) for attaching the finisher cover.
  • Attaching bolts are included with the finisher cover.
  • The width across flats of the hexagon socket is 2.5 mm.
  • We recommend to remove the muffler when you attach the option finisher cover.
    * There are cases in which can be attached without removing the muffler, depending on the vehicle.
  • Remove the bolt after the threadlocker agent is softened when removing the finisher cover.
    Note: Heat the bolt from the inside of the bolt.
  • When a bolt got stripped, catch the bolt head by plier then, turn it.

SIZE: D=75, L=76