ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35 Photo-0
ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35 Photo-1
ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35 Photo-2

ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35

AED 69.93

Tax included. Shipping calculated at checkout

ATP TURBOP/N: ATP-OIL-021 GTIN: 2000000011660
In stock
Quantity:
Pickup available at ATOMIC-SHOP UAE Usually ready in 1 hour

ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35

ATOMIC-SHOP UAE

Pickup available, usually ready in 1 hour

26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates

+97143580877

ATOMIC-SHOP UAE (RABDAN Motorsport)

Pickup currently unavailable

14 10b St - Al Quoz Industrial Area 3
Dubai DU
United Arab Emirates

+971559861650

-4 (-4AN) Size oil inlet restrictor fitting (0.035" orifice / hole size) for Garrett GT and GTX Ball Bearing Turbochargers. Output is -4AN male flare. High durability and reusable Stainless Steel material.

Use with any -4AN oil feed lines with a -4AN female hose end!

Fits Garrett GT25R, GT28R, GT30R, GT35R, GTX28R, GTX29R, GTX30R, and GTX35R series models.

Please Note: NEVER use thread sealant with this fitting. The fitting engages with the mating part and creates a "compression" seal once installed. Any type of liquid or thread sealant used will run the risk of plugging up the oil feed port causing oil starvation and failure of the turbo.