AMS ALP.28.13.0003-1 Quick Flash for INFINITI Q50 / Q60

Description AMS ALP.28.13.0003-1 Quick Flash for INFINITI Q50 / Q60

The AMS Performance VR30 (ECU) Quick Flash for Q50/Q60 provides a fast and effective ECU flashing solution without the need for extended remote tuning sessions. It is designed for Infiniti Q50 and Q60 owners seeking an affordable option when maximum horsepower extraction is not required. Developed with a focus on engine and drivetrain longevity, the calibration maximizes horsepower on pump gas for specific modifications while minimizing excessive wear and potential repairs.

This entry-level tune is calibrated for use on vehicles ranging from mechanically stock to full bolt-on configurations. The AMS team creates a calibration file based on the vehicle's modifications to ensure an optimal match. The tune increases the redline to 7200 RPM, up from the factory 6800 RPM, and delivers significant gains in horsepower and torque, with power output varying depending on the installed modifications.

The AMS VR30 Quick Flash uses EcuTek’s Phone Flash system, allowing for quick programming through the OBD2 port with no need for soldering or physical ECU access. The EcuTek ProECU Tuning Suite enables calibration and reprogramming of the vehicle’s ECU via the on-board diagnostics port, supporting diagnostics and data-logging as well as guided reprogramming through a mobile app.

Note: If fuel lower than 93 AKI octane is used (such as California 91 octane), expected horsepower will be reduced. 93 octane gasoline is recommended for best results, and once tuned, continued use of the same octane is required. Power results may vary due to differences between vehicles, dynamometer brands, climate, and elevation.

• Significant increase in horsepower and torque immediately after installation
• Custom calibration for modifications from stock to full bolt-on
• Utilizes EcuTek Phone Flash system for a simple flashing process
• Redline increased to 7200 RPM from the stock 6800 RPM

Specifications:

• Approx. Horsepower: 390-405 WHP*
• Approx. Torque: 400-415 lb-ft*
• Approx. Boost Level: 17 PSI*

Kit comes with:

• AMS VR30 (ECU) Quick Flash Calibration File via E-mail
• EcuTek Flash Points (Software license fee) (Optional, drop down menu selection)
• EcuTek Phone Flash Points (Software license fee) (Optional, drop down menu selection)
• EcuTek Bluetooth Flashing & Datalogging Interface (OBD2 Plug) (Optional, drop down menu selection)

Vehicle Compatibility:

• 2016-2021 INFINITI Q50 with 3.0L Twin Turbo VR30 (Including all sub-models)
• 2017-2021 INFINITI Q60 with 3.0L Twin Turbo VR30 (Including all sub-models)