AMS ALP.07.08.0101-97 Billet Intake Manifold with Triple Fuel Rail 18 Injector Custom (Specify Color) for NISSAN GT-R (R35)

Description AMS ALP.07.08.0101-97 Billet Intake Manifold with Triple Fuel Rail 18 Injector Custom (Specify Color) for NISSAN GT-R (R35)

The Alpha Performance R35 GT-R Cast Aluminum Intake Manifold Plenums are engineered by AMS for maximum efficiency and power. Every detail has been carefully considered to create a high-performance induction component. This intake manifold delivers performance gains not just at the top end but throughout the entire power band.

Unlike many aftermarket GT-R intake manifolds, the Alpha GT-R Cast Aluminum Intake Manifold Plenums provide consistent horsepower and torque from the moment the turbos spool up, without sacrificing response or power under the curve. The lightweight cast aluminum plenums are molded and tapered for optimal airflow, reducing turbulence and accelerating charged air delivery to the engine.

Each manifold is matched for precise airflow between the throttle body and cylinder heads, using tight tolerances and dowel locating pins to maintain smooth transitions. The manifold is rigorously tested, including cycle testing from 0–50psi in high heat and a burst test over 150psi. Provisions for an additional fuel rail support high-powered applications, and optional Alpha billet big bore throttle bodies are available for vehicles exceeding 800HP.

Product Notes: AMS Performance R35 GT-R Big Bore Billet Throttle Bodies available separately.

Product Notes: Custom PCV routing would be needed if the owner wishes to retain its functionality.

Product Notes: Alpha upper intercooler pipe adapter for current Alpha intercooler piping or full Alpha Induction Kit is required.

Product Notes: While other fuel rail kits may work (stock rails are not compatible), AMS can only guarantee AMS/ALPHA Fuel rails to be compatible with this Intake Manifold.

Product Notes: Custom color anodizing can add 2-4 weeks to build time.

Product Notes: 14035-JF00A OEM Nissan Gasket – R35 GT-R Lower Intake Manifold to Cylinder Head (Need qty. 2).

Product Notes: 16175-ET80A OEM Nissan Gasket – R35 GT-R Throttle Body to Manifold Adapter (Need qty. 2).

• Over 25% lighter than the leading cast intake manifold
• Dowel pin aligned for smooth, continuous flow between upper and lower runners
• Dual MAP sensor ports for monitoring bank-to-bank boost differences
• Retains PCV and functions like stock, with extra vacuum ports on plenums

Kit comes with:

• Cast Aluminum Plenums
• Billet Upper Intake Runner
• Billet Lower Intake Runner
• Vacuum and Boost Fitting Kit
• Adapters for Stock Throttle Bodies

Vehicle Compatibility:

• 2009+ Nissan R35 GT-R (USDM, JDM, Gulf Spec, and European Models, LHD & RHD)