Short answer
M45IL, M45XL and MR45XLZ share a nominal NGK 9 heat-range reference, but they are different plug types. M45IL has a larger thread than M45XL; MR45XLZ adds a different, projected firing-end design. Select by the full code and the engine's required specification. The common “45” does not make these plugs interchangeable.
Key points
- Preserve every letter, including IL, XL and MR…XLZ.
- Compare thread diameter, reach, hex and firing-end shape separately.
- Keep electrode material distinct from mechanical fit and heat range.
- Use an application match; equal dimensions alone are not an engine approval.
Compare the exact specifications
- HKS order code: 50003-M45IL (M45iL) Thread / reach: M14 × 1.25 / 26.5 mm Hex: 16 mm Centre electrode / firing-end distinction: M-series iridium alloy; long-reach iL type
- HKS order code: 50003-M45XL Thread / reach: M12 × 1.25 / 26.5 mm Hex: 16 mm Centre electrode / firing-end distinction: M-series iridium alloy; XL type
- HKS order code: 50003-MR45XLZ Thread / reach: M12 × 1.25 / 26.5 mm Hex: 16 mm Centre electrode / firing-end distinction: Ruthenium alloy; projected MR-XLZ type
The first distinction eliminates a common ordering mistake: a 14 mm threaded plug is not a substitute for a 12 mm threaded application. The shared 26.5 mm reach and 16 mm hex do not cancel that difference. Keep the complete HKS part number on the enquiry and the order rather than selecting from a shortened “M45 long reach” description.
Equal thread dimensions do not mean equal firing position
M45XL and MR45XLZ need a different comparison. Their listed thread dimensions match, while HKS distinguishes the projected MR design and its ruthenium centre electrode. HKS describes the projected ignition position as 2 mm further forward than the usual design. That changes the shape that must be matched to the application; it is not a universal upgrade for engines using M45XL.
An electrode-material description answers a separate question from fit. It should not be used to overrule the required projection, seat or upper-body specification. If an offer uses an MR code but describes a generic iridium plug, resolve the identity against the manufacturer's exact product information rather than treating the prose as permission to substitute another family.
Check the easily confused shorter code
50003-M45I is also distinct from 50003-M45IL: HKS lists M45i with M14 thread and 19 mm reach. Dropping the final L therefore changes the required product. When comparing sellers, put the full code, quantity and intended engine side by side. A heat-equivalent description and similar photograph are insufficient to identify the item.
The comparison table is deliberately not a vehicle fitment list. Before choosing between these codes, identify the original plug specification and any changed cylinder head. Keep the seat type and upper-body connection in that check, even where the abbreviated dimension rows look alike.
Important: HKS warns that an incompatible projected MR plug can cause serious engine damage. Confirm the required firing-end design as well as the catalogue dimensions before selecting MR45XLZ.

