Short answer
Changing heat range on a boosted FA20 must preserve the plug specification required by the actual cylinder head and ignition system. For HKS's listed Toyota 86 ZN6 and Subaru BRZ ZC6 FA20 applications, the reference family is M-HL: M12 long reach with a 14 mm hex. That family reference is not a heat-range prescription for every boosted build.
Key points
- Identify the exact FA20 version and any cylinder-head changes.
- Keep thread/pitch, reach, seat and firing-end shape correct.
- Retain the required hex, body clearance and ignition connection.
- Set heat range and electrode gap as separate build-specific decisions.
Use the bounded catalogue reference
HKS's application table names the FA20 Toyota 86 ZN6 and Subaru BRZ ZC6, with their listed production periods. Its M-Series specification gives the M-HL family M12 × 1.25 thread, 26.5 mm reach and a 14 mm hex. Use those details to identify the starting family for those applications, rather than extending “FA20” to every vehicle or modified head bearing that engine name.
- Requirement: Thread and reach What to preserve or establish: Exact diameter/pitch and the specified threaded length
- Requirement: Seat and firing end What to preserve or establish: Required sealing design and projection, including any changed head specification
- Requirement: External interface What to preserve or establish: Hex size, plug-well/body clearance and coil/terminal connection
- Requirement: Thermal and electrical setting What to preserve or establish: The selected heat range and separate gap requirement for the build
- Requirement: Order reference What to preserve or establish: Complete HKS code and the required quantity
Do not replace the family with a heat-number shortcut
HKS 50003-M45I is a useful contrast: its listed M14 thread and 19 mm reach differ from the M-HL format. The shared “45” does not make it a substitute. Nor does a same-diameter projected plug become suitable merely because its reach looks similar. Preserve the firing-end design required by the application alongside the basic thread dimensions.
Treat a changed cylinder head as a change to the baseline, not a detail that the original vehicle chart automatically covers. The engine builder's actual head specification must be available before selecting by a catalogue entry. The same applies when the ignition arrangement differs from the original application.
Then choose for the forced-induction build
Give the engine builder or calibrator the current plug code, boost system, fuel, calibration and road/track workload. Ask for the complete chosen replacement code. The existence of M45HL or M50HL in a catalogue only establishes that those products exist; it does not assign either one to your boost level or power target.
For an enquiry described simply as “BRZ plugs”, state ZC6 and FA20 explicitly. A different generation or a changed engine needs its own application reference, even when the vehicle name remains familiar.
Important: A standard FA20 application listing does not validate a modified engine's heat range or gap. Confirm those build-specific choices while keeping the required mechanical and ignition compatibility; no universal boosted-FA20 setting follows from the catalogue family.
