ST 68517019 Spring Package 70-140*/ 10-60-80 TOYOTA GR YARIS 2020+
Quantity:
This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.
Pickup available at ATOMIC-SHOP UAE
Usually ready in 1 hour
ST 68517019 Spring Package 70-140*/ 10-60-80 TOYOTA GR YARIS 2020+
ATOMIC-SHOP UAE
Pickup available, usually ready in 1 hour
26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates
ST SPRING PACKAGE 70-140*/ 10-60-80
PART-NO.: 68517019
Please observe the conditions and instructions for this product.
Spring Rate (Racing Spring): 70
Inner Diameter (Racing Spring): 61
Length (Racing Spring): 140
Valid Spring Travel (Racing Spring): 86
Wire Diameter (Racing Spring): 9,75
Approval: without
Content of delivery: 2 x race spring, 2 x pre-load spring including intermediate ring
Car type: TOYOTA YARIS (_P21_, _PA1_, _PH1_) 02/2020- 1.6 GR 4WD (GXPA16) - 200kW - 1618ccm - 3 cyl. - All-wheel Drive
ST additional racing spring kits for coilover kits
With the additional ST racing spring kits we offer to individually adapt the setup of your ST coilover kit to your needs.
Our additional racing spring kits are available in different spring rates and lengths, therefore allowing a more sporty or even more comfortable suspension setup.
Spring markings – what you should know
Example: FA 70-170*
FA = front axle (RA = rear axle), 70 = spring rate, 170 = spring length, * = high-strength racing spring made out of a material with higher load capacity
What does spring rate and spring length mean?Spring rate:
The spring rate shows, how much power (in kg) is needed to compress the spring by 10mm. The higher the spring rate, the harder the spring itself is. Example: At a spring rate of 70, the spring will be compressed by 10mm at a load of 70kg.
Lower spring rate = less setup frequency, the vehicle is getting more comfortable and lower at payload.
Higher spring rate = higher setup frequency, the vehicle is getting sportier and less low at payload.
Spring length:
Information on the length of the spring in mm
Longer spring = less possible lowering
Shorter spring = more possible lowering
The optional ST spring packages are supplied as additional items. By using these optional ST spring packages, which deviate from the parts certificate, in combination with our ST XTA coilover kit, the operating permit expires in accordance with Section 19.2 of the StVZO. This can be regained through an individual acceptance according to §21 StVZO. Spring data sheets are made available as a working basis for the expert. These contain the information that the springs are permanently operational. Ultimately, however, it is always at the discretion of the expert whether to make the entry.
The Unibal support bearings must be dismantled in order to mount the optional spring assemblies. We recommend using the dome bearing follower 68510179