RADIUM 20-0100-00 MULTIPUMP REGULATOR, BLACK
Quantity:
This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.
Pickup available at ATOMIC-SHOP UAE
Usually ready in 1 hour
RADIUM 20-0100-00 MULTIPUMP REGULATOR, BLACK
ATOMIC-SHOP UAE
Pickup available, usually ready in 1 hour
26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates
MPR, Multi-Port Regulator
INSTALLATION INSTRUCTIONS can be downloaded here
The Multi Port Regulator (MPR) is the ultimate solution for simple or complex high-flow fuel systems. It's unique port configuration makes it ideal for combining several fuel pumps into a single feed line or vice versa. However, it can also be used for single pump applications by simply plugging the unused ports.
.png)
The MPR can be plumbed many different ways to suit most any installation; traditional flow-through or dead-end systems. Because of this flexibility, it is also perfect for Radium fuel systems by eliminating the need for an extra "Y" fitting. The lower 2 opposing return ports are unique in that they flow parallel with the pressure ports eliminating the need for elbow fittings. Either lower port can be used for the return line, just plug the one not used (a plug is included).
.png)
This regulator can be floor mounted. Alternatively, wall mounting can be accomplished by not using the included mounting bracket and simply mounting using the holes that pass through the body, or by mounting the regulator sideways.
It is compatible with all gasoline and alcohol blends of fuel including E85. Fuel pressure is dialed in using the preload set screw on top.
.png)
In the Box:
- Multi-Port Regulator
- Mounting bracket with hardware
- Interchangeable return orifices
- 6AN ORB plug (x2)
- 8AN ORB plug (x1)
- 6AN male adapter (x3)
- 8AN male adapter (x1)
The graph below shows the minimum fuel pressure the regulator can achieve as a function of pump flow rate. This test was performed with the adjustment screw completely backed out, no preload.
For example, if you have two pumps that flow 320LPH (total 640LPH), the approximate minimum pressure the regulator can achieve is about 23.5 psi. Note: if an OEM fuel pressure regulator is used for 640LPH, it will likely not be able to bypass enough fuel.
With the Radium MPR, simply spin the set screw clockwise to achieve higher pressures. Note: Most EFI systems operate at 43.5 psi (3Bar) static fuel pressure.
.png)