HKS 80300-AT002 Сoilover kit Hipermax S USE20 for LEXUS IS F Photo-0
HKS 80300-AT002 Сoilover kit Hipermax S USE20 for LEXUS IS F Photo-1

HKS 80300-AT002 Сoilover kit Hipermax S USE20 for LEXUS IS F

Sale priceAED 8,599.50

Tax included. Shipping calculated at checkout

HKSP/N: 80300-AT002 GTIN: 4957266322147
Quantity:

This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.

Pickup available at ATOMIC-SHOP UAE Usually ready in 1 hour

HKS 80300-AT002 Сoilover kit Hipermax S USE20 for LEXUS IS F

ATOMIC-SHOP UAE

Pickup available, usually ready in 1 hour

26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates

+97143580877

IS F USE20

S

Code No. 80300-AT002

Going beyond just ride comfort or handling performance, a new standard of "Driving Comfort" aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.

The model in the photo is USE20.

Application

Engine 2UR-GSE
Model Year 07/12 - 14/05
Remarks  

Specification

  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Rubber Rubber
Inverted/Normal type Normal Normal
Damper/Spring layout Coilover Coilover
Spring rate change at factory Impossible Impossible
Damping force adjustment with wire -
Helper spring
(Spring rate N/mm)
〇 (19.8) 〇 (19.8)

Ride Heightmm

  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 670 687 ~ 634 687 ~ 634
Against stock -17 0 ~ -53 0 ~ -53
REAR Ride height *1 648 667 ~ 590 667 ~ 590
Against stock -19 0 ~ -77 0 ~ -77

 

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

 

Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 157 ( 16.0 ) 98 ( 10.0 )
Free height (mm) 200 220
Spring type Straight Straight Barrel type
Recommended range to change spring rate N/mm(kgf/mm) - -

Specification of damper

  F R
Damping force (Rebound/Damping)N* 1648 / 608 814 / 530
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 70 / 46 69 / 67

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
404 416 388 393 407 368
Spring
Set length(mm)
266 266 275 276 276 291
Length to ride hight
adjuster (mm)
41 53 16 40 54 0
Lever ratio 1.46 1.44

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.


 

Test vehicle information

  F R
Vehicle weight kg 943 (930) 769 (760)
Tire size (Air pressure) kPa 225 / 35 - 19 ( 250 ) 255 / 30 - 19 ( 250 )
Wheel size 9.0 JJ × 19 inset 45 9.0 JJ × 19 inset 45
Alignment
(Toe/Camber)
Test data out 1.3 mm / -1°52' in 3 mm / -2°04'
Standard value in 0 ± 2 mm / 0°50' ± 0°45' in 3 ± 2 mm / -0°45' ± 0°45'

* Test data at HKS.

 

Parts List  * It may be changed without prior notice.