HKS 80300-AF019C Сoilover kit Hipermax S VN5 CANCELLER for SUBARU Levorg Photo-0
HKS 80300-AF019C Сoilover kit Hipermax S VN5 CANCELLER for SUBARU Levorg Photo-1

HKS 80300-AF019C Сoilover kit Hipermax S VN5 CANCELLER for SUBARU Levorg

Sale priceAED 10,510.50

Tax included. Shipping calculated at checkout

HKSP/N: 80300-AF019C
Quantity:

This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.

Pickup available at ATOMIC-SHOP UAE Usually ready in 1 hour

HKS 80300-AF019C Сoilover kit Hipermax S VN5 CANCELLER for SUBARU Levorg

ATOMIC-SHOP UAE

Pickup available, usually ready in 1 hour

26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates

+97143580877

LEVORG VN5

S

Code No. 80300-AF019C

 

Going beyond just ride comfort or handling performance, a new standard of "Driving Comfort" aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.

 

 

Application

Engine CB18(TURBO)
Model Year 20/11 - 
Remarks

Specification

  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Rubber Rubber
Inverted/Normal type Inverted Normal
Damper/Spring layout Coilover Coilover
Spring rate change at factory Impossible Impossible
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)
- 〇 (19.8)

Ride Heightmm

  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 664 693 ~ 641 693 ~ 645
Against stock -29 0 ~ -52 0 ~ -48
REAR Ride height *1 672 704 ~ 630 704 ~ 630
Against stock -32 0 ~ -74 0 ~ -74

 

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

 

Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 59 ( 6.0 ) 59 ( 6.0 )
Free height (mm) 200 170
Spring type Straight Barrel type Straight
Recommended range to change spring rate N/mm(kgf/mm) - -

Specification of damper

  F R
Damping force (Rebound/Damping)N* 314 / 392 353 / 373
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 60 / 46 69 / 47

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
320 349 307 271 296 246
Spring
Set length(mm)
198 198 204 217 217 224
Length to ride hight
adjuster (mm)
19 48 0 57 82 25
Lever ratio 1.00 1.30

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

 

Test vehicle information

  F R
Vehicle weight kg 926 (930) 646 (650)
Tire size (Air pressure) kPa 235 / 40 - 19 ( 260 ) 235 / 40 - 19 ( 250 )
Wheel size 8.5 JJ × 19 inset 51 8.5 JJ × 19 inset 51
Alignment
(Toe/Camber)
Test data in 0 mm / -1°28' in 0 mm / -1°38'
Standard value 0 ± 2 mm / -0°40' ± 0°30' 0 ± 2 mm / -

* Test data at HKS.

 

Parts List   * It may be changed without prior notice.