HKS 11004-AD004 TURBINE KIT DX SPORTS L880K DX Photo-0

HKS 11004-AD004 TURBINE KIT DX SPORTS L880K DX

Sale priceAED 9,174.68

Tax included. Shipping calculated at checkout

HKSP/N: 11004-AD004
Quantity:

This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.

We have renewed popular L880K DX turbine kit for Daihatsu Copen. Reasonable price for an absolute power for your Copen.

FEATURES
Extreme power for over 3500RPM! HKS DX30KAI can produce more than 110 horse power which is not easy for a normal turbine to make.
Total bolt on installation.
Employed the newly designed "HKS DX 30KAI Turbine".
We designed it to use with stock catalyzer to have a low cost tunig.

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

  Power Torque
HKS DX30KAI 120.0ps/7300rpm 13.7kgf m/4900rpm
Stock Boost-up 86.3ps/6100rpm 12.5kg-m/3300rpm
Test vehicle specification
 
for HKS DX turbine test
Vehicle L880K early model
Intake 70020-AD002 HKS Racing Suction Reloaded
Exhaust 31021-AD002 HKS LEGAMAX
Cooling 13001-AD001 HKS R type Intercooler Kit
13002-AD001 HKS Piping Kit
Fuel 1407-RA015 HKS adjustable fuel regulator
Electronics 42011-AK003 HKS F-con iS
45003-AK011 HKS EVC6
Spark Plug 50003-M35i HKS SUPER FIRE RACING M35i
Gasoline high octane  
 
for Stock Boost-up test
Vehicle L880K early model
Exhasut 31021-AD002 HKS LEGAMAX
Solenoid Revised Stock orifice
Gasoline regular

 

Installation Notice

* Approximate installation time: 8 hours

* Please make sure to reset the fuel and ignition when using HKS products.

* Because it’s a small size, good response turbine, it might have a surging if used with high boost pressure start-up boost controller.

To avoid surging, we recommend to use a throttle control correction system, such as HKS boost controller EVC 5 or later

* Need a fuel tuning for boost over 110kPa (120ps).

* Because the later model is a return less system, it needs to use early model fuel pipes or change for a high capacity injector.

* We have set around 88.3kPa (0.9kgf/cm2) for factory setting actuator boost pressure.

The approximate boost pressure adjustment is about 4.9kPa (0.05kgf/cm2) for 1mm of actuator rod length change.