GARRETT 860778-5002S Supercore Series G42-1200 Compact CHS
Quantity:
Pickup available at ATOMIC-SHOP UAE
Usually ready in 1 hour
GARRETT 860778-5002S Supercore Series G42-1200 Compact CHS
ATOMIC-SHOP UAE
Pickup available, usually ready in 1 hour
26th Street - Al Quoz Industrial Area 2
Dubai DU
United Arab Emirates
Garrett® G42-1200 Compact
Horsepower: 475-1200
Displacement: 2.0L-7.0L
- G Series compressor aero (10 blade)
- 109 Lbs/Min compressor flow
- 0.90 A/R comp housing
- Hose connection comp outlet
- Water fittings included (-6an fittings *same as G25)
- Stainless steel turbine housings rated up to 950 deg C
- Compact design is 4mm smaller axially than the G42 standard
Technology and Features
Compressor Housing
Garrett® G42-1200 available with compact housing and standard housing
Garrett® G42-1450 available only with standard housing
-(A) Fully machined ported shroud to help reduce compressor surge.
-(B) A fully machined speed sensor port provides racers the option to add a
speed sensor. Comparing shaft speed and boost levels on a compressor map
will help determine ideal operating conditions to ensure peak power over a
wider operating range.
-(C ) The fully machined pressure port.
*Sold separately, the Garrett ® G Series speed sensor kits have new part
numbers and are not compatible with GT/GTX kits. Easier to install and will
not need to be adjusted for length like previous sensors. Simply remove bolt
that secures the plug, insert the speed sensor and re-tighten the bolt.
WARNING: Dear customer - G series turbochargers are highly efficient units that don't require a high boost for reaching its limits. Please pay attention that maximum allowable turbocharger speed is 165krpm ( G series ) . The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating a speed sensor, part numbers 781328-0004 (single speed sensor that should be connected) or GARRETT G-SMART MODULE ( Module | Harness | Flange Speed Sensor G-Series ) must be fitted and monitored during fine and tune as well as with use of the unit. Missing of the sensors or RPM data will void warranty on product.