{"product_id":"syvecs-syv-4wdyaris-awd-controller-for-toyota-gr-yaris-gxpa16-2020-2023","title":"SYVECS SYV-4WDYaris AWD Controller for TOYOTA GR Yaris (GXPA16) 2020-2023","description":"\u003ch2\u003eDescription SYVECS SYV-4WDYaris AWD Controller for TOYOTA GR Yaris (GXPA16) 2020-2023\u003c\/h2\u003e \u003ch3\u003eDescription\u003c\/h3\u003e \u003cp\u003eThe Syvecs Toyota Yaris GR AWD module is a standalone AWD\/4WD\/centre differential controller designed to provide full control of the Yaris GR AWD system.\u003c\/p\u003e \u003cp\u003eOEM controllers are locked and not adjustable. Fitting the Yaris GR AWD module provides additional control and prevents instant AWD dropouts on the circuit. The controller replicates all OEM CAN information and receives variables from the OEM CAN system, including steering angle, brake pressure, RPM, TPS, lateral G, yaw, longitudinal G, speeds, temperatures, and mode switches.\u003c\/p\u003e \u003cp\u003eThe differential mode buttons provide live switching between AWD Select 1, 2, and 3 duty maps to adjust AWD clamping. Burnout mode can also be activated through the hazard lights, Handbrake, or an external switch.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptional:\u003c\/strong\u003e Syvecs offers a loom for external burnout switches and live-adjustment potentiometers, allowing AWD duty adjustment while driving or switching to 2WD. This option is for rally cars only and must be ordered with the unit.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLimp protection for excessive slip, current, and temperature warns the driver while keeping AWD active, unlike OEM controllers that shut down the outputs.\u003c\/li\u003e \u003cli\u003eSCAL software provides access to more than 40 maps for controlling the solenoids and motors used in the AWD system.\u003c\/li\u003e \u003cli\u003eFirmware and software are updated regularly. The latest versions are available at http:\/\/www.syvecs.com\/forum\/.\u003c\/li\u003e \u003cli\u003eSuitable for vehicles with high Horsepower \/ HP where OEM shutdowns may be undesirable, particularly mid-corner.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eAvailable Maps\u003c\/h3\u003e \u003cp\u003eFour base duty tables and four adders with enable maps are available for left-foot braking, front slip, rear slip, and centre slip.\u003c\/p\u003e \u003cp\u003eFour multipliers with enable maps are available for steering angle, AWD temperature, AWD pressure, and the AWD potentiometer. Tyre diameter adjustment is available under sensors.\u003c\/p\u003e \u003ch3\u003e2WD\/Burnout Mode\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDedicated switched input\u003c\/li\u003e \u003cli\u003eCAN bus message\u003c\/li\u003e \u003cli\u003eOEM functions\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimiters and Protection\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMaximum duty, launch control limit, and duty rate of change\u003c\/li\u003e \u003cli\u003eDecay and hold functions\u003c\/li\u003e \u003cli\u003eLimp mode with over-current, excessive-slip, and over-temperature protection\u003c\/li\u003e \u003cli\u003eCooling pump control and AWD cooling pump control logic\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eDatastream\u003c\/h3\u003e \u003cp\u003eThe Syvecs AWD unit has a dedicated CAN bus transmit area for sending AWD variables to external control units for monitoring or to the OEM CAN bus system through custom identifiers and byte structuring.\u003c\/p\u003e \u003ch3\u003eSensors and Switches\u003c\/h3\u003e \u003cp\u003eExternal sensors can be connected to the AWD module and linearized in SCAL software.\u003c\/p\u003e \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e Does the module prevent the rear from fully disengaging when the clutches reach approximately 100 degrees?\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The module slowly reduces current to the AWD solenoid instead of releasing it fully like the OEM controller. The rear disengages only when 2WD mode is active or the Handbrake is pulled.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e Can the module provide more than 70% rear bias, and does its 30\/70% rear bias feel different from the stock system?\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The module can run more rear-wheel-drive bias than the OEM unit. Litchfield testing on an advanced MAHA dynamometer achieved slightly more Torque at the rear by increasing current through the solenoid. This is fully adjustable in software, and the base map applies this higher current and duty in Track mode.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e What are the benefits if the module does not increase rear bias beyond 70% or raise the clutch-pack temperature limit beyond approximately 100 degrees?\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The fully adjustable unit allows live rear-wheel-drive bias adjustment through software, OEM buttons, or external potentiometers. Control strategies can be configured for tyre sizes, engine Torque curves, temperature limit requirements, and other vehicle specifications. Toyota uses the unit for rally builds for these reasons.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMaximum Current: 30 A through pin sharing using HBR1 and HBR2 or HBR3 and HBR4\u003c\/li\u003e \u003cli\u003eCurrent Monitoring: Onboard monitoring for each output\u003c\/li\u003e \u003cli\u003eCAN Bus: 2 configurable transmit channels through SCAL\u003c\/li\u003e \u003cli\u003eAnalog Inputs: 4 for a burnout switch, adjustment potentiometer, pressure sensor, and temperature sensor\u003c\/li\u003e \u003cli\u003eABS Sensor Inputs: 4 magnetoresistive inputs for direct speed monitoring\u003c\/li\u003e \u003cli\u003eUSB Connection: Dedicated SCAL software with full calibration control\u003c\/li\u003e \u003cli\u003eMain Power Control: Circuit controlled by the ignition switch\u003c\/li\u003e \u003cli\u003eProtection: Reverse-polarity protection\u003c\/li\u003e \u003cli\u003eEnclosure: Weatherproof\u003c\/li\u003e \u003cli\u003eTemperature Capability: 125°C\u003c\/li\u003e \u003cli\u003eOperating Voltage: 6-25 V\u003c\/li\u003e \u003c\/ul\u003e","brand":"SYVECS","offers":[{"title":"Default Title","offer_id":48545874510110,"sku":"SYV-4WDYaris","price":5964.78,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/syvecs-syv-4wdyaris.jpg?v=1789644822","url":"https:\/\/atomic-shop.ae\/products\/syvecs-syv-4wdyaris-awd-controller-for-toyota-gr-yaris-gxpa16-2020-2023","provider":"ATOMIC-SHOP Performance Parts \u0026 Motorsport Equipment - UAE","version":"1.0","type":"link"}