{"product_id":"eventuri-eve-c8htc-cf-int-eu-air-intake-system-carbon-for-chevrolet-corvette-stingray-hard-top-convertible-c8","title":"EVENTURI EVE-C8HTC-CF-INT-EU Air Intake System (Carbon) for CHEVROLET Corvette Stingray Hard Top Convertible (C8)","description":"\u003ch2\u003eDescription EVENTURI EVE-C8HTC-CF-INT-EU Air Intake System (Carbon) for CHEVROLET Corvette Stingray Hard Top Convertible (C8)\u003c\/h2\u003e \u003cp\u003eThe C8 Corvette Eventuri intake system sets a new benchmark for performance and internal volume. Restricted by the OEM trunk panel, the panel was redesigned in clear polycarbonate to accommodate a larger intake and display the Carbon Fiber intake when the trunk is open.\u003c\/p\u003e \u003cp\u003eEventuri's patented Venturi housing concept provides a less tortuous Airflow path through the filters, reducing system drag. Increased intake volume also raises Flow capacity, allowing higher-powered builds to maximize performance gains.\u003c\/p\u003e \u003cp\u003eIntake air temperature \/ IAT is minimized through a sealed system, OEM air feeds, and Carbon Fiber with low thermal conductivity across the Wall thickness. The system provides performance gains and a noticeable improvement in Throttle response.\u003c\/p\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCarbon Fiber double Venturi filter housing\u003c\/li\u003e \u003cli\u003eBespoke high-Flow dry Cone filters\u003c\/li\u003e \u003cli\u003eCarbon Fiber inlet ducts\u003c\/li\u003e \u003cli\u003eClear polycarbonate trunk panel\u003c\/li\u003e \u003cli\u003eInternally stepped silicone coupler\u003c\/li\u003e \u003cli\u003eLaser-cut Stainless steel brackets and Heat shields\u003c\/li\u003e \u003cli\u003eCustom inlet flanges\u003c\/li\u003e \u003cli\u003eCustom flexible hoses\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFilter Housing:\u003c\/h3\u003e \u003cp\u003eThe C8 filter housing uses two patented Venturi pods that merge into one outlet. It comprises two bespoke high-Flow filters, aluminum cowls, laser-cut brackets, and the Carbon Fiber pod.\u003c\/p\u003e \u003cp\u003eThe Carbon Fiber pod shrouds the reverse-mounted filters and smoothly shapes the Airflow toward the Throttle body. This reduction in cross-sectional area creates the Venturi effect, accelerating Airflow while maintaining laminar conditions. The housing functions as a large Velocity stack.\u003c\/p\u003e \u003ch3\u003eBespoke Cone Filter:\u003c\/h3\u003e \u003cp\u003eThe Filter element is designed to maximize the available space in the Engine bay and achieve the highest possible Flow rate. The dry filter medium is ISO tested to ensure filtration is in line with OEM standards. Signature Flow cones support the Venturi housing principle.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFilter outside diameter: 192 mm (7.6 inches)\u003c\/li\u003e \u003cli\u003eHousing opening: 4 inches\u003c\/li\u003e \u003cli\u003eFlow rate: Up to 900 CFM at 28 inches H2O\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCarbon Fiber Ducts:\u003c\/h3\u003e \u003cp\u003eThe ducts channel ambient air from the side vents to the filter housing. They are secured to the filter housing at three points and use a neoprene gasket for an airtight seal against Engine bay heat.\u003c\/p\u003e \u003cp\u003eThe ducts provide the maximum possible internal volume within the available Engine bay geometry, allowing the filter housing to draw air with minimal restriction.\u003c\/p\u003e \u003ch3\u003eClear Trunk Panel:\u003c\/h3\u003e \u003cp\u003eThe stock trunk panel restricted the space required for a high-volume intake with smooth Airflow to the engine. The redesigned clear polycarbonate panel accommodates the intake and provides a window to display the Carbon Fiber intake when the trunk is open.\u003c\/p\u003e \u003ch3\u003eBracket Work:\u003c\/h3\u003e \u003cp\u003eThe framework secures the OEM wiring looms in place and keeps them out of view. The brackets are laser-cut from Stainless steel and aluminum.\u003c\/p\u003e \u003ch3\u003eInlet Flanges:\u003c\/h3\u003e \u003cp\u003eCustom inlet flanges and flexible hoses connect the intake system to the stock cold-air feeds on each side, keeping Engine bay heat out of the system.\u003c\/p\u003e \u003ch3\u003eSilicone Coupler:\u003c\/h3\u003e \u003cp\u003eThe silicone coupler replaces the stock Throttle body coupler. It matches the OEM Throttle body and features internal steps covering the Wall thickness of both the Throttle body and Carbon Fiber intake, creating a seamless path into the plenum.\u003c\/p\u003e \u003cp\u003eThe complete intake system improves upon the stock Airbox in performance, aesthetics, and sound.\u003c\/p\u003e ","brand":"EVENTURI","offers":[{"title":"Default Title","offer_id":59922318885150,"sku":"EVE-C8HTC-CF-INT-EU","price":9494.94,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/eventuri-eve-c8vt-cf-int-eu-air-intake-system_1.jpg?v=1788959084","url":"https:\/\/atomic-shop.ae\/products\/eventuri-eve-c8htc-cf-int-eu-air-intake-system-carbon-for-chevrolet-corvette-stingray-hard-top-convertible-c8","provider":"ATOMIC-SHOP Performance Parts \u0026 Motorsport Equipment - UAE","version":"1.0","type":"link"}