{"title":"SPEED Engineering","description":"","products":[{"product_id":"speed-engineering-13212-seat-console-with-adapter-passenger-side-for-bmw-1-2-3-4-series-m2-m3-m4-gx-fx-e8x-e9x","title":"SPEED ENGINEERING 13212 Seat Console with Adapter (Passenger Side) for BMW 1\/2\/3\/4 Series\/M2\/M3\/M4 (Gx, Fx, E8x, E9x)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13212 Seat Console with Adapter (Passenger Side) for BMW 1\/2\/3\/4 Series\/M2\/M3\/M4 (Gx, Fx, E8x, E9x)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13212 Seat Console with Adapter is designed for the passenger side of BMW 1 Series, 2 Series, 3 Series, 4 Series, M2, M3, and M4 models on Gx, Fx, E8x, and E9x platforms. This safety-critical seat mounting component was developed using FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position. Cut-outs and component shapes are based on calculated and simulated stress distribution under load. The installation space is measured beforehand using a 3D laser scanner to reduce fastening material, simplify installation, and use the available space efficiently.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening\u003c\/li\u003e \u003cli\u003eInstallation space measured using a 3D laser scanner\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003cli\u003eHarness Compatibility: Expandable with step belt fastening\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger side\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitment \/ Vehicle compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBMW E82 M Coupe\u003c\/li\u003e \u003cli\u003eBMW E88 \/ E82\u003c\/li\u003e \u003cli\u003eBMW E90 \/ E92\u003c\/li\u003e \u003cli\u003eBMW E90 \/ E92 M3\u003c\/li\u003e \u003cli\u003eBMW F20 \/ F21 LCI Facelift\u003c\/li\u003e \u003cli\u003eBMW F20 \/ F21 VFL\u003c\/li\u003e \u003cli\u003eBMW F22\u003c\/li\u003e \u003cli\u003eBMW F80 M3\u003c\/li\u003e \u003cli\u003eBMW F82 M4\u003c\/li\u003e \u003cli\u003eBMW F87 M2\u003c\/li\u003e \u003cli\u003eBMW F87 M2 Competition\u003c\/li\u003e \u003cli\u003eBMW G20 \/ G21 M340i\u003c\/li\u003e \u003cli\u003eBMW G22 \/ G23 \/ G26 M440i\u003c\/li\u003e \u003cli\u003eBMW G42 M240i\u003c\/li\u003e \u003cli\u003eBMW G80 M3\u003c\/li\u003e \u003cli\u003eBMW G82 M4\u003c\/li\u003e \u003cli\u003eBMW G87 M2\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516461756702,"sku":"13212","price":1611.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/593594-speed-engineering-13212-1.jpg?v=1791871243"},{"product_id":"speed-engineering-13256-brake-cooling-kit-for-bmw-m2-m3-m4-g80-g81-g82-g87","title":"SPEED ENGINEERING 13256 Brake Cooling Kit for BMW M2 \/ M3 \/ M4 (G80\/G81\/G82\/G87)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13256 Brake Cooling Kit for BMW M2 \/ M3 \/ M4 (G80\/G81\/G82\/G87)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13256 Brake Cooling Kit is a Track Set designed for BMW M2, M3, and M4 models G80, G81, G82, and G87. The system is intended for ambitious drivers using their vehicles on the racetrack and can be combined with the Clubsport Brake Cooling Set.\u003c\/p\u003e \u003cp\u003eThe air duct inlet connects the standard front bumper inlet ducts to the brake cooling outlet via a hose routed around the wheel. It replaces the original duct connector and uses the same connection points as the OEM duct.\u003c\/p\u003e \u003cp\u003eThe anchor plate channels airflow toward the centre of the brake disc \/ brake rotor, using the turbine effect to cool the disc from the inside. The lightweight, powder-coated aluminium construction provides strength and durability, while heat shielding protects nearby bearings where necessary.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Installation requires no special tools, is fully reversible, and leaves no residue.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle compatibility Note:\u003c\/strong\u003e Wheel position varies slightly between models, chassis geometries, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for racetrack use on BMW M2, M3, and M4 G80, G81, G82, and G87 models\u003c\/li\u003e \u003cli\u003eRoutes airflow around the wheel to prevent uncontrolled swirling inside the wheel arch\u003c\/li\u003e \u003cli\u003eA defined airflow angle supports effective use of the available air volume\u003c\/li\u003e \u003cli\u003eCan be combined with the Clubsport Brake Cooling Set\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eSet Type: Track Set\u003c\/li\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003cli\u003eAir Hose Length: 2 metres each\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct inlet\u003c\/li\u003e \u003cli\u003e1x right air duct inlet\u003c\/li\u003e \u003cli\u003e1x left anchor plate\u003c\/li\u003e \u003cli\u003e1x right anchor plate\u003c\/li\u003e \u003cli\u003e2x air hoses, 2 metres each\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516460183838,"sku":"13256","price":2215.97,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/593180-speed-engineering-13256-1_b71c8363-c4ae-4010-b2e2-fafa73c34f5c.jpg?v=1791870985"},{"product_id":"speed-engineering-13210-centre-console-with-adapter-passenger-side-for-bmw-3-series-e36-e46-m3-e46-z4-coupe-e86","title":"SPEED ENGINEERING 13210 Centre Console with Adapter (Passenger Side) for BMW 3 Series (E36 \/ E46) \/ M3 (E46) \/ Z4 Coupe (E86)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13210 Centre Console with Adapter (Passenger Side) for BMW 3 Series (E36 \/ E46) \/ M3 (E46) \/ Z4 Coupe (E86)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13210 Centre Console with Adapter is designed for the passenger side of the BMW 3 Series E36 \/ E46, BMW M3 E46, and BMW Z4 Coupe E86. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Component cut-outs and shapes are based on calculated and simulated stress distribution under load, while the installation space is measured using a 3D laser scanner to maximise available space.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eDesigned for Recaro guide rails\u003c\/li\u003e \u003cli\u003ePassenger-side centre console and adapter\u003c\/li\u003e \u003cli\u003eInstallation space measured using a 3D laser scanner\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed for Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger side\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516461855006,"sku":"13210","price":1611.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/593592-speed-engineering-13210-1.jpg?v=1791864521"},{"product_id":"speed-engineering-13209-centre-console-with-adapter-drivers-side-for-bmw-3-series-e36-e46-m3-e46-z4-coupe-e86","title":"SPEED ENGINEERING 13209 Centre Console with Adapter (Driver's Side) for BMW 3 Series (E36 \/ E46) \/ M3 (E46)\/ Z4 Coupe (E86)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13209 Centre Console with Adapter (Driver's Side) for BMW 3 Series (E36 \/ E46) \/ M3 (E46) \/ Z4 Coupe (E86)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13209 Centre Console with Adapter is designed for the driver side of the BMW 3 Series E36 \/ E46 \/ E86 and BMW M3 E46. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Cut-outs and component shapes are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to reduce fastening material, simplify installation, and use the available space efficiently.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower Torque loads on the components\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eCan be expanded with step belt fastening for six-point harnesses\u003c\/li\u003e \u003cli\u003eRequires individual approval in accordance with §21 by TÜV\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003cli\u003eHarness Compatibility: Can be expanded with step belt fastening for six-point harnesses\u003c\/li\u003e \u003cli\u003eRegistration Requirement: Individual approval in accordance with §21 by TÜV is required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516461822238,"sku":"13209","price":1611.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/593593-speed-engineering-13209-1.jpg?v=1791863796"},{"product_id":"speed-engineering-13456-brake-cooling-kit-for-volkswagen-golf-vii-gti-r-5g-seat-leon-iii-cupra-5f","title":"SPEED ENGINEERING 13456 Brake Cooling Kit for VOLKSWAGEN Golf VII GTI \/ R (5G) \/ SEAT Leon III Cupra (5F)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13456 Brake Cooling Kit for VOLKSWAGEN Golf VII GTI \/ R (5G) \/ SEAT Leon III Cupra (5F)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13456 Brake Cooling Kit is designed for the VOLKSWAGEN Golf VII GTI \/ R 5G and SEAT Leon III Cupra 5F. The system channels airflow from the underbody to the brake ventilation outlet to support brake cooling under load.\u003c\/p\u003e \u003cp\u003eThe air duct inlet uses a suitable underbody location available across vehicle specifications, including manual gearbox and DSG variants. This position captures airflow effectively without being the lowest point of the vehicle. The air duct is secured with three screws and connects to the anchor plate through an air hose.\u003c\/p\u003e \u003cp\u003eThe air duct outlet channels airflow toward the centre of the brake disc \/ brake rotor, using the turbine effect to cool the disc from the inside. Airflow is directed at a specific angle to avoid efficiency loss. The lightweight, powder-coated aluminium construction provides strength and durability, while the anchor plate helps shield the nearby wishbone ball joint from heat.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Hose routing must be planned carefully because steering components may cause hose chafing over time at full steering lock.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the VOLKSWAGEN Golf VII GTI \/ R 5G and SEAT Leon III Cupra 5F\u003c\/li\u003e \u003cli\u003eCompatible with manual gearbox and DSG variants\u003c\/li\u003e \u003cli\u003eAirflow is directed toward the centre of the brake disc \/ brake rotor to support cooling from the inside\u003c\/li\u003e \u003cli\u003eLightweight, powder-coated aluminium construction\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003cli\u003eAir Hose Length: 2 metres total\u003c\/li\u003e \u003cli\u003eTransmission Compatibility: Manual gearbox and DSG\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct inlet for the front axle\u003c\/li\u003e \u003cli\u003e1x right air duct inlet for the front axle\u003c\/li\u003e \u003cli\u003e1x left mounting plate for the front axle\u003c\/li\u003e \u003cli\u003e1x right mounting plate for the front axle\u003c\/li\u003e \u003cli\u003e6x washers\u003c\/li\u003e \u003cli\u003e6x body screws\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003cli\u003e2x air hoses, 2 metres total\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462313758,"sku":"13456","price":1772.15,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/speed-engineering-13456.jpg?v=1791779141"},{"product_id":"speed-engineering-13211-seat-console-with-adapter-drivers-side-for-bmw-1-2-3-4-series-m2-m3-m4-gx-fx-e8x-e9x","title":"SPEED ENGINEERING 13211 Seat Console with Adapter (Driver's Side) for BMW 1\/2\/3\/4 Series\/M2\/M3\/M4 (Gx, Fx, E8x, E9x)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13211 Seat Console with Adapter (Driver's Side) for BMW 1\/2\/3\/4 Series\/M2\/M3\/M4 (Gx, Fx, E8x, E9x)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13211 Seat Console with Adapter is designed for the driver’s side of selected BMW Gx, Fx, E8x, and E9x models. This safety-critical seat mounting component was developed using FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed for the lowest possible central seating position in front of the steering wheel. Component shapes and cut-outs are based on calculated and simulated stress distribution under load. The installation space was measured using a 3D laser scanner for smooth installation, reduced fastening material, and maximum use of available space.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower Torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step-belt fastening\u003c\/li\u003e \u003cli\u003eDesigned to allow Recaro guide rails to be fitted\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver’s side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to allow Recaro guide rails to be fitted\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitment \/ Vehicle compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBMW E82 M Coupe\u003c\/li\u003e \u003cli\u003eBMW E88 \/ E82\u003c\/li\u003e \u003cli\u003eBMW E90 \/ E92\u003c\/li\u003e \u003cli\u003eBMW E90 \/ E92 M3\u003c\/li\u003e \u003cli\u003eBMW F20 \/ F21 LCI Facelift\u003c\/li\u003e \u003cli\u003eBMW F20 \/ F21 VFL\u003c\/li\u003e \u003cli\u003eBMW F22\u003c\/li\u003e \u003cli\u003eBMW F80 M3\u003c\/li\u003e \u003cli\u003eBMW F82 M4\u003c\/li\u003e \u003cli\u003eBMW F87 M2\u003c\/li\u003e \u003cli\u003eBMW F87 M2 Competition\u003c\/li\u003e \u003cli\u003eBMW G20 \/ G21 M340i\u003c\/li\u003e \u003cli\u003eBMW G22 \/ G23 \/ G26 M440i\u003c\/li\u003e \u003cli\u003eBMW G42 M240i\u003c\/li\u003e \u003cli\u003eBMW G80 M3\u003c\/li\u003e \u003cli\u003eBMW G82 M4\u003c\/li\u003e \u003cli\u003eBMW G87 M2\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516461789470,"sku":"13211","price":1611.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/593595-speed-engineering-13211-1.jpg?v=1791871171"},{"product_id":"speed-engineering-13420-front-brake-cooling-kit-for-bmw-m2-f87-not-competition","title":"SPEED ENGINEERING 13420 Front Brake Cooling Kit for BMW M2 (F87) (Not Competition)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13420 Front Brake Cooling Kit for BMW M2 (F87) (Not Competition)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13420 Front Brake Cooling Kit is developed specifically for the BMW M2 (F87) and is designed to improve brake cooling efficiency under both road and track driving conditions. By directing a controlled airflow from the front radiator area to the center of the brake discs, the system helps reduce brake temperatures, improve braking consistency, and minimize wear of friction components.\u003c\/p\u003e \u003cp\u003eThe kit utilizes specially designed inlet ducts that capture airflow exiting the factory side radiators and channel it through dedicated hoses to lightweight aluminum brake backing plates. These backing plates direct air into the center of the brake disc at an optimized angle, utilizing the disc's internal turbine effect for maximum cooling efficiency. The powder-coated aluminum construction combines low weight, durability, and resistance to harsh operating conditions.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned specifically for BMW M2 (F87) models\u003c\/li\u003e \u003cli\u003eImproves brake cooling performance for street and track use\u003c\/li\u003e \u003cli\u003eReduces brake disc and pad operating temperatures\u003c\/li\u003e \u003cli\u003eHelps decrease wear of braking components\u003c\/li\u003e \u003cli\u003eUtilizes airflow from the factory radiator outlets\u003c\/li\u003e \u003cli\u003eOptimized airflow routing to the center of the brake disc\u003c\/li\u003e \u003cli\u003eLightweight powder-coated aluminum backing plates\u003c\/li\u003e \u003cli\u003eDesigned to maintain efficient airflow without restricting radiator discharge\u003c\/li\u003e \u003cli\u003eMay help reduce heat exposure to nearby wheel bearings\u003c\/li\u003e \u003cli\u003eComplete installation kit included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBacking Plate Material: Powder-coated aluminum\u003c\/li\u003e \u003cli\u003eHose Length: 1 m total (40 cm per side connection)\u003c\/li\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eIncluded Components: 2 inlet ducts, 2 outlet ducts, air hose, screws, washers, hose clamps\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462182686,"sku":"13420","price":2215.97,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC01860_c30ea3c4-08fd-4d1d-95c3-509cbb2b7d4d.jpg?v=1780056649"},{"product_id":"speed-engineering-13387-rear-axle-brake-cooling-kit-for-bmw-m3-e90-e92","title":"SPEED ENGINEERING 13387 Rear Axle Brake Cooling Kit for BMW M3 (E90 \/ E92)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13387 Rear Axle Brake Cooling Kit for BMW M3 (E90 \/ E92)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13387 Rear Axle Brake Cooling Kit is designed for the rear axle of the BMW M3 E90 and BMW M3 E92. On racing cars, the inner surface of the rear brake disc \/ rear brake rotor can become extremely hot even with a brake upgrade. The temperature difference between the inner and outer surfaces can lead to uneven brake pad wear.\u003c\/p\u003e \u003cp\u003eThis plug-and-play solution requires no vehicle modifications or installation of hoses, clamps, or additional accessories. Air is directed through an air duct to the inner side of the rear brake disc \/ rear brake rotor, while an additional air duct system uses negative pressure to draw in more cool air flowing beneath the vehicle.\u003c\/p\u003e \u003cp\u003eThe system is designed for use with the anchor plate removed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models may vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRear axle brake cooling kit for the BMW M3 E90 and BMW M3 E92\u003c\/li\u003e \u003cli\u003eDesigned to reduce the thermal load on the inner surface of the rear brake disc \/ rear brake rotor\u003c\/li\u003e \u003cli\u003eHelps reduce uneven brake pad wear caused by temperature differences\u003c\/li\u003e \u003cli\u003ePlug-and-play installation with no vehicle modifications required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Rear axle\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play\u003c\/li\u003e \u003cli\u003eInstallation Requirement: Anchor plate removal required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct, left\u003c\/li\u003e \u003cli\u003e1x air duct, right\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462641438,"sku":"13387","price":700.07,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/521274_W2yG_13387.jpg?v=1791779140"},{"product_id":"speed-engineering-13531-rear-axle-brake-cooling-kit-for-bmw-1-series-e82-e88","title":"SPEED ENGINEERING 13531 Rear Axle Brake Cooling Kit for BMW 1 Series (E82 \/ E88)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13531 Rear Axle Brake Cooling Kit for BMW 1 Series (E82 \/ E88)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13531 Rear Axle Brake Cooling Kit is designed for the BMW 1 Series E82 \/ E88. On race cars, the inner surface of the rear axle brake disc \/ brake rotor can reach extremely high temperatures despite a brake upgrade, and excessive heat build-up can cause uneven brake pad wear.\u003c\/p\u003e \u003cp\u003eThe plug-and-play cooling system uses the original mounting points on the wishbone and requires no vehicle modifications, hoses, clamps, or additional accessories. Each air duct channels air directly into the inside of the rim through a flow channel.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRecommendation:\u003c\/strong\u003e Removal of the anchor plate is strongly recommended.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Wheel positions vary slightly between models, chassis geometries, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRear axle brake cooling kit for BMW 1 Series E82 \/ E88\u003c\/li\u003e \u003cli\u003eDesigned to reduce excessive heat build-up on the inner surface of the brake disc \/ brake rotor\u003c\/li\u003e \u003cli\u003eHelps address temperature differences between the inner and outer brake disc \/ brake rotor surfaces\u003c\/li\u003e \u003cli\u003eDirects air into the inside of the rim through a flow channel\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Rear axle\u003c\/li\u003e \u003cli\u003eMounting: Original wishbone mounting points\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play\u003c\/li\u003e \u003cli\u003eInstallation Note: No vehicle modifications, hoses, clamps, or additional accessories required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct, left\u003c\/li\u003e \u003cli\u003e1x air duct, right\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462510366,"sku":"13531","price":834.27,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/13531.png?v=1791779146"},{"product_id":"speed-engineering-14149-universal-front-and-rear-axles-brake-cooling-kit","title":"SPEED ENGINEERING 14149 Universal Front and Rear Axles Brake Cooling Kit","description":"\u003ch2\u003eDescription SPEED ENGINEERING 14149 Universal Front and Rear Axles Brake Cooling Kit\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 14149 Universal Front and Rear Axles Brake Cooling Kit is designed to improve brake cooling on vehicles with limited front axle cooling and, in most cases, no rear axle cooling. Brake cooling supports the performance, durability, and service life of the brakes and related components.\u003c\/p\u003e \u003cp\u003eThe universal cooling system was extensively tested over several months on a wide range of vehicles. Its geometry is designed to fit most wishbones and allows plug-and-play installation using cable ties, without a lifting platform or wheel removal.\u003c\/p\u003e \u003cp\u003eThe flat inlets redirect airflow beneath the vehicle toward the centre of the rotating wheel. A continuous taper between the inlet and outlet accelerates airflow while maintaining the same volume.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Minor adjustments to the cooling ducts may be required on some vehicles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUniversal brake cooling kit for front axle and rear axle applications\u003c\/li\u003e \u003cli\u003eDesigned to support brake performance, durability, and service life\u003c\/li\u003e \u003cli\u003eGeometry fits most common wishbones\u003c\/li\u003e \u003cli\u003eIntegrated slots allow mounting with cable ties\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle and rear axle\u003c\/li\u003e \u003cli\u003eMaterial: PA12 plastic\u003c\/li\u003e \u003cli\u003eMounting: Integrated slots with cable ties\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x Universal Brake Cooler L\u003c\/li\u003e \u003cli\u003e1x Universal Brake Cooler R\u003c\/li\u003e \u003cli\u003e6x Cable Ties\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516461986078,"sku":"14149","price":543.02,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/593596-speed-engineering-14149-1.jpg?v=1792045920"},{"product_id":"speed-engineering-13493-centre-console-with-adapter-passenger-side-for-volkswagen-golf-vii-r-gti-clubsport-tcr-golf-viii-r-gti-audi-ttrs-8j-8s","title":"SPEED ENGINEERING 13493 Centre Console with Adapter (Passenger Side) for VOLKSWAGEN Golf VII R\/GTI\/Clubsport\/TCR\/Golf VIII R \/ GTI \/ AUDI TTRS (8J\/8S)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13493 Centre Console with Adapter (Passenger Side) for VOLKSWAGEN Golf VII R\/GTI\/Clubsport\/TCR\/Golf VIII R \/ GTI \/ AUDI TTRS (8J\/8S)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13493 Centre Console with Adapter is a passenger-side seat console and adapter system for selected Volkswagen, Audi, SEAT, and VW Polo models. This safety-critical seat mounting solution was developed using FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe seat console is designed to provide the lowest possible central seating position in front of the steering wheel. Component shapes and cut-outs are based on calculated and simulated stress distribution under load, with the installation space measured using a 3D laser scanner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced fastening material and installation effort while maximising available installation space\u003c\/li\u003e \u003cli\u003eReduced lever arms between fixing points help reduce torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitment \/ Vehicle compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAudi A3\u003c\/li\u003e \u003cli\u003eAudi A4\u003c\/li\u003e \u003cli\u003eAudi TTRS 8J\u003c\/li\u003e \u003cli\u003eAudi TTRS 8S\u003c\/li\u003e \u003cli\u003eAudi TTS 8J\u003c\/li\u003e \u003cli\u003eAudi TTS 8S\u003c\/li\u003e \u003cli\u003eSEAT Leon Cupra 5F\u003c\/li\u003e \u003cli\u003eVW Golf 6 GTI\u003c\/li\u003e \u003cli\u003eVW Golf 6 R\u003c\/li\u003e \u003cli\u003eVW Golf 7 GTI\u003c\/li\u003e \u003cli\u003eVW Golf 7 GTI CS\u003c\/li\u003e \u003cli\u003eVW Golf 7 R\u003c\/li\u003e \u003cli\u003eVW Golf 7 TCR\u003c\/li\u003e \u003cli\u003eVW Golf 8 GTI\u003c\/li\u003e \u003cli\u003eVW Golf 8 R\u003c\/li\u003e \u003cli\u003eVW Polo 6 AW\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468343070,"sku":"13493","price":1431.56,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/13493.png?v=1791779146"},{"product_id":"speed-engineering-13583-brake-cooling-system-for-audi-ttrs-8j","title":"SPEED ENGINEERING 13583 Brake Cooling System for AUDI TTRS (8J)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13583 Brake Cooling System for AUDI TTRS (8J)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13583 Brake Cooling System is designed for the AUDI TTRS 8J to improve brake cooling at the front axle. The system uses the existing air duct in front of the wheel and extends airflow routing around the wheel toward the brake ventilation outlet.\u003c\/p\u003e \u003cp\u003eThe outlet mounts to the wishbone and directs airflow toward the centre of the brake disc \/ brake rotor regardless of wheel position. The system is secured using existing locking pins without permanent vehicle modifications. Because the system does not pivot with the wheel, the hose is not under constant strain, and a short hose reduces airflow losses.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUses the existing front air duct and an extension to guide airflow around the wheel\u003c\/li\u003e \u003cli\u003ePrevents uncontrolled air swirl inside the wheel arch\u003c\/li\u003e \u003cli\u003eAirflow direction remains independent of wheel position\u003c\/li\u003e \u003cli\u003eShort hose routing reduces airflow losses and hose strain\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAir Hose Length: 1 metre total; 40 cm hose routing on each side\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet for front axle left\u003c\/li\u003e \u003cli\u003e1x air duct inlet for front axle right\u003c\/li\u003e \u003cli\u003e6x fixing screws with washers\u003c\/li\u003e \u003cli\u003e1x air duct outlet for front axle left\u003c\/li\u003e \u003cli\u003e1x air duct outlet for front axle right\u003c\/li\u003e \u003cli\u003e1x air hose, 1 metre\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462575902,"sku":"13583","price":1426.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC01013.jpg?v=1791779147"},{"product_id":"speed-engineering-13611-seat-angle-adapter-for-porsche-918-spyder-911-gt3-gt3-rs-991-1-991-2-911-gt2-rs-991-2-cayman-981-718-cayman-982","title":"SPEED ENGINEERING 13611 Seat Angle Adapter for PORSCHE 918 Spyder \/ 911 GT3 \/ GT3 RS (991.1\/991.2) \/ 911 GT2 RS (991.2) \/ Cayman (981) \/ 718 Cayman (982)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13611 Seat Angle Adapter for PORSCHE 918 Spyder \/ 911 GT3 \/ GT3 RS (991.1\/991.2) \/ 911 GT2 RS (991.2) \/ Cayman (981) \/ 718 Cayman (982)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13611 Seat Angle Adapter is designed for selected PORSCHE models with Clubsport 918 bucket seats. It tilts the seat back by 5.4 degrees, improving helmet comfort on track days while maintaining the field of vision despite the steeper seat-back angle.\u003c\/p\u003e \u003cp\u003eThe adapters are suitable for the driver and\/or passenger seat and are 100% made in Germany, including development and the entire manufacturing process.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e When the adapters are fitted, the rear of the seat sits lower, so the sliding rail must not be adjusted forwards or backwards in its lowest position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Act (StVO).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with Section 21 by TÜV is required.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for selected PORSCHE models with Clubsport 918 bucket seats\u003c\/li\u003e \u003cli\u003eTilts the seat back by 5.4 degrees\u003c\/li\u003e \u003cli\u003eImproves helmet comfort on track days\u003c\/li\u003e \u003cli\u003eSuitable for the driver and\/or passenger seat\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSeat Angle Change: 5.4 degrees\u003c\/li\u003e \u003cli\u003eInstallation Position: Driver and\/or passenger seat\u003c\/li\u003e \u003cli\u003eSeat Compatibility: Clubsport 918 bucket seats only\u003c\/li\u003e \u003cli\u003eManufacturing Origin: 100% made in Germany\u003c\/li\u003e \u003cli\u003eBolt Specification: 10.9 bolts\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1 left-hand adapter\u003c\/li\u003e \u003cli\u003e1 right-hand adapter\u003c\/li\u003e \u003cli\u003e1 set of 10.9 bolts\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468539678,"sku":"13611","price":1406.88,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/13611.png?v=1791779137"},{"product_id":"speed-engineering-13486-brake-cooling-kit-for-bmw-m3-f80-m4-f82","title":"SPEED ENGINEERING 13486 Brake Cooling Kit for BMW M3 (F80) \/ M4 (F82)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13486 Brake Cooling Kit for BMW M3 (F80) \/ M4 (F82)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13486 Brake Cooling Kit is designed for the BMW M3 F80 and BMW M4 F82. The system channels airflow from the front bumper area to the brake ventilation outlet to support braking performance and reduce wear on the friction surfaces.\u003c\/p\u003e \u003cp\u003eUnlike the M2 Competition, the BMW M3 F80 and BMW M4 F82 do not have factory-fitted air ducts in the front bumper. The kit uses existing airflow around the side radiators behind the bumper, with guide channels preventing air from swirling randomly in the wheel arch after passing through the radiators. Each side connects to the outlet through a 40 cm hose.\u003c\/p\u003e \u003cp\u003eThe air duct outlet channels airflow toward the centre of the brake disc \/ brake rotor, using the turbine effect to cool the disc from the inside. Airflow is directed at a specific angle to avoid efficiency loss and use the available air volume efficiently. The lightweight, powder-coated aluminium construction remains strong and durable, while nearby bearings are shielded from heat where required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle compatibility Note:\u003c\/strong\u003e Models vary slightly in wheel position, suspension geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBrake cooling kit designed for the BMW M3 F80 and BMW M4 F82\u003c\/li\u003e \u003cli\u003eUses existing airflow around the side radiators behind the front bumper\u003c\/li\u003e \u003cli\u003eGuide channels prevent uncontrolled airflow swirl in the wheel arch\u003c\/li\u003e \u003cli\u003eTesting showed no significant back pressure behind the radiator\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003cli\u003eAir Hose Length: 40 cm per side\u003c\/li\u003e \u003cli\u003eSupplied Air Hose Length: 1 metre\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet, left\u003c\/li\u003e \u003cli\u003e1x air duct inlet, right\u003c\/li\u003e \u003cli\u003e1x air duct outlet, left\u003c\/li\u003e \u003cli\u003e1x air duct outlet, right\u003c\/li\u003e \u003cli\u003e1x air hose, 1 metre\u003c\/li\u003e \u003cli\u003e6x fixing screws\u003c\/li\u003e \u003cli\u003e6x washers\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462379294,"sku":"13486","price":2172.01,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC00419.jpg?v=1791779142"},{"product_id":"speed-engineering-13483-seat-console-with-adapter-drivers-side-for-mini-cooper-f56","title":"SPEED ENGINEERING 13483 Seat Console with Adapter (Driver's Side) for Mini Cooper (F56)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13483 Seat Console with Adapter (Driver's Side) for Mini Cooper (F56)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13483 Seat Console with Adapter is designed for the driver’s side of the MINI Cooper F56. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console provides the lowest possible central seating position in front of the steering wheel. Component shapes and cut-outs are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to reduce fastening material, simplify installation, and maximise available space.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval by TÜV in accordance with §21 is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver’s side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468441374,"sku":"13483","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC03073.jpg?v=1791779138"},{"product_id":"speed-engineering-13492-seat-console-with-adapter-drivers-side-for-volkswagen-golf-vii-r-gti-clubsport-tcr-golf-viii-r-gti-audi-ttrs-8j-8s","title":"SPEED ENGINEERING 13492 Seat Console with Adapter (Driver's Side) for VOLKSWAGEN Golf VII R\/GTI\/Clubsport\/TCR\/Golf VIII R \/ GTI \/ AUDI TTRS (8J\/8S)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13492 Seat Console with Adapter (Driver's Side) for VOLKSWAGEN Golf VII R\/GTI\/Clubsport\/TCR\/Golf VIII R \/ GTI \/ AUDI TTRS (8J\/8S)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13492 Seat Console with Adapter is designed for the driver side of VOLKSWAGEN Golf VII R, GTI, Clubsport, TCR, Golf VIII R, Golf VIII GTI, and AUDI TTRS 8J \/ 8S applications. The seat console and adapter are also suitable for selected Golf, Polo, SEAT, and Audi driver-side applications.\u003c\/p\u003e \u003cp\u003eThe seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation. Component shapes and cut-outs are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to enable smooth installation with reduced fastening material.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Installation can be booked through the optional items. Workshop installation and registration appointments can be arranged by email.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Note:\u003c\/strong\u003e Material certificates are provided through a download link in the order confirmation. The flat-rate TÜV registration fee is charged only once when ordering driver- and passenger-side sets together.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the lowest possible central seating position\u003c\/li\u003e \u003cli\u003eReduced lever arms between fixing points help lower Torque loads on the components\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening for six-point harnesses\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger side\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitment \/ Vehicle compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAudi A3\u003c\/li\u003e \u003cli\u003eAudi A4\u003c\/li\u003e \u003cli\u003eAudi TTRS 8J\u003c\/li\u003e \u003cli\u003eAudi TTRS 8S\u003c\/li\u003e \u003cli\u003eAudi TTS 8J\u003c\/li\u003e \u003cli\u003eAudi TTS 8S\u003c\/li\u003e \u003cli\u003eSEAT Leon Cupra 5F\u003c\/li\u003e \u003cli\u003eVW Golf 6 GTI\u003c\/li\u003e \u003cli\u003eVW Golf 6 R\u003c\/li\u003e \u003cli\u003eVW Golf 7 GTI\u003c\/li\u003e \u003cli\u003eVW Golf 7 GTI CS\u003c\/li\u003e \u003cli\u003eVW Golf 7 R\u003c\/li\u003e \u003cli\u003eVW Golf 7 TCR\u003c\/li\u003e \u003cli\u003eVW Golf 8 GTI\u003c\/li\u003e \u003cli\u003eVW Golf 8 R\u003c\/li\u003e \u003cli\u003eVW Polo 6 AW\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516463067422,"sku":"13492","price":1431.56,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/speed-engineering-13492-1.jpg?v=1791779149"},{"product_id":"speed-engineering-13479-brake-cooling-kit-for-bmw-m3-e46","title":"SPEED ENGINEERING 13479 Brake Cooling Kit for BMW M3 (E46)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13479 Brake Cooling Kit for BMW M3 (E46)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13479 Brake Cooling Kit is a complete front axle brake cooling system designed for the BMW M3 E46. It extends the standard front bumper inlet ducts, guides airflow around the wheel, and connects the air duct inlets to the anchor plates using a 40 cm hose on each side.\u003c\/p\u003e \u003cp\u003eThe anchor plates channel airflow toward the centre of the brake disc \/ brake rotor, using the turbine effect to cool the disc from the inside. The defined airflow angle helps reduce energy loss and uses the available air volume efficiently.\u003c\/p\u003e \u003cp\u003eBearings closest to the brake disc \/ brake rotor are shielded from heat where necessary to help extend their service life. The powder-coated aluminium construction provides strength while remaining lightweight and durable.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Act (StVO).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval by TÜV in accordance with §21 is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Wheel position varies slightly between models, chassis geometries, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eComplete front axle brake cooling system designed for the BMW M3 E46\u003c\/li\u003e \u003cli\u003eGuides airflow around the wheel and prevents uncontrolled swirling inside the wheel arch\u003c\/li\u003e \u003cli\u003eDirects airflow toward the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003cli\u003eUses the turbine effect to cool the brake disc \/ brake rotor from the inside\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003cli\u003eAir Hose Length: 40 cm per side\u003c\/li\u003e \u003cli\u003eTotal Hose Length: 1 metre\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet for the front axle, left\u003c\/li\u003e \u003cli\u003e1x air duct inlet for the front axle, right\u003c\/li\u003e \u003cli\u003e8x fixing screws with washers\u003c\/li\u003e \u003cli\u003e1x mounting plate for the front axle, left\u003c\/li\u003e \u003cli\u003e1x mounting plate for the front axle, right\u003c\/li\u003e \u003cli\u003e1x air hose, 1 metre\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462805278,"sku":"13479","price":1673.41,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/13479.png?v=1791779143"},{"product_id":"speed-engineering-13582-brake-cooling-kit-for-bmw-3-series-e46","title":"SPEED ENGINEERING 13582 Brake Cooling Kit for BMW 3 Series (E46)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13582 Brake Cooling Kit for BMW 3 Series (E46)\u003c\/h2\u003e \u003cp\u003eThe Brake Cooling Kit for BMW 3 Series E46 is designed to guide airflow from the front bumper inlet ducts to the brake disc \/ brake rotor area. It is intended for BMW E46 AG models where an OEM air duct is already fitted.\u003c\/p\u003e \u003cp\u003eThe system uses air duct extensions and hose routing to prevent uncontrolled airflow inside the wheel arch. The air duct outlet mounts to the wishbone and directs airflow toward the centre of the brake disc \/ brake rotor, using the turbine effect of the disc regardless of wheel position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eGuides air from the front bumper inlet ducts to the brake ventilation outlet\u003c\/li\u003e \u003cli\u003eAir duct extensions route airflow around the wheel arch\u003c\/li\u003e \u003cli\u003eThe wishbone-mounted air duct outlet maintains airflow direction regardless of wheel position\u003c\/li\u003e \u003cli\u003eSecured using existing locking pins with no permanent vehicle modifications required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAir Hose Length: 1 metre total; 40 cm hose routing on each side\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet for front axle left\u003c\/li\u003e \u003cli\u003e1x air duct inlet for front axle right\u003c\/li\u003e \u003cli\u003e6x fixing screws with washers\u003c\/li\u003e \u003cli\u003e1x air duct outlet for front axle left\u003c\/li\u003e \u003cli\u003e1x air duct outlet for front axle right\u003c\/li\u003e \u003cli\u003e1x air hose, 1 metre\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462608670,"sku":"13582","price":1426.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/Design_20ohne_20Titel.png?v=1791779136"},{"product_id":"speed-engineering-13515-seat-console-with-adapter-passenger-side-for-mini-cooper-f56","title":"SPEED ENGINEERING 13515 Seat Console with Adapter (Passenger Side) for MINI Cooper (F56)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13515 Seat Console with Adapter (Passenger Side) for MINI Cooper (F56)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13515 Seat Console with Adapter is designed for the passenger side of the MINI Cooper F56. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Component cut-outs and shapes are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to reduce fastening material, simplify installation, and maximise available space.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePassenger-side seat console and adapter designed for the MINI Cooper F56\u003c\/li\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening for six-point harnesses\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003cli\u003eHarness Compatibility: Expandable with step belt fastening for six-point harnesses\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger side\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468408606,"sku":"13515","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC03073_20_281_29.jpg?v=1791779149"},{"product_id":"speed-engineering-13735-centre-console-with-adapter-drivers-side-for-toyota-gt86-zn6-gr86-zn8-subaru-brz-zc6-zd8","title":"SPEED ENGINEERING 13735 Centre Console with Adapter (Driver's Side) for TOYOTA GT86 (ZN6) \/ GR86 (ZN8) \/ SUBARU BRZ (ZC6 \/ ZD8)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13735 Centre Console with Adapter (Driver's Side) for TOYOTA GT86 (ZN6) \/ GR86 (ZN8) \/ SUBARU BRZ (ZC6 \/ ZD8)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13735 centre console with adapter is designed for the driver’s side of the TOYOTA GT86 ZN6, TOYOTA GR86 ZN8, SUBARU BRZ ZC6, and SUBARU BRZ ZD8. The seat mounting is a safety-critical component developed using FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Component shapes and cut-outs are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to reduce fastening material, simplify installation, and maximise available space.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver’s side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468605214,"sku":"13735","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/635356-speed-engineering-13735-1.jpg?v=1792034683"},{"product_id":"speed-engineering-13561-centre-console-with-adapter-passenger-side-for-audi-r8-4s-porsche-cayman-981-718-cayman-982","title":"SPEED ENGINEERING 13561 Centre Console with Adapter (Passenger Side) for AUDI R8 (4S) \/ PORSCHE Cayman (981) \/ 718 Cayman (982)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13561 Centre Console with Adapter (Passenger Side) for AUDI R8 (4S) \/ PORSCHE Cayman (981) \/ 718 Cayman (982)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13561 Centre Console with Adapter is designed for the passenger side of the Audi R8 4S, Porsche Cayman 981, and Porsche 718 Cayman 982. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position. Cut-outs and component shapes are based on calculated and simulated stress distribution under load, while the installation space is measured using a 3D laser scanner to reduce fastening material and installation effort.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for passenger-side Audi R8 and Porsche Cayman applications\u003c\/li\u003e \u003cli\u003eReduced lever arms between mounting points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with SPEED step belt mounting\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item no. 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitment \/ Vehicle compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAudi R8 4S\u003c\/li\u003e \u003cli\u003ePorsche Cayman 718\u003c\/li\u003e \u003cli\u003ePorsche Cayman 718 GT4\u003c\/li\u003e \u003cli\u003ePorsche Cayman 718 GT4 RS\u003c\/li\u003e \u003cli\u003ePorsche Cayman 981\u003c\/li\u003e \u003cli\u003ePorsche Cayman 981 GT4\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468310302,"sku":"13561","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC00641.jpg?v=1791779149"},{"product_id":"speed-engineering-13580-brake-cooling-kit-for-volkswagen-polo-v-r-wrc-street-6r","title":"SPEED ENGINEERING 13580 Brake Cooling Kit for VOLKSWAGEN Polo V \/ R WRC Street (6R)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13580 Brake Cooling Kit for VOLKSWAGEN Polo V \/ R WRC Street (6R)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13580 Brake Cooling Kit is designed for the VOLKSWAGEN Polo V \/ R WRC Street 6R. The system cools the brakes as efficiently as possible using a wear-free hose mounting system.\u003c\/p\u003e \u003cp\u003eThe air inlets use airflow beneath the vehicle to direct as much air as possible toward the brakes. They are integrated into the underbody and, despite their optimised flow area, do not form the vehicle’s lowest point.\u003c\/p\u003e \u003cp\u003eThe cooling system mounts to the wishbone and directs airflow centrally toward the brake disc \/ brake rotor regardless of wheel position, using the turbine effect for internal cooling. Installation uses existing locking pins and requires no permanent vehicle modifications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e The underbody must be modified to accommodate the air inlets.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the VOLKSWAGEN Polo V \/ R WRC Street 6R\u003c\/li\u003e \u003cli\u003eWear-free hose mounting system\u003c\/li\u003e \u003cli\u003eIntegrated underbody air inlets with an optimised flow area\u003c\/li\u003e \u003cli\u003eWishbone-mounted cooling system directs airflow centrally toward the brake disc \/ brake rotor\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMounting: Wishbone-mounted cooling system with existing locking pins\u003c\/li\u003e \u003cli\u003eHose Length: 2 metres each\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct outlet\u003c\/li\u003e \u003cli\u003e1x right air duct outlet\u003c\/li\u003e \u003cli\u003e2x air inlet ducts\u003c\/li\u003e \u003cli\u003e2x hoses, 2 metres each\u003c\/li\u003e \u003cli\u003e4x mounting clamps\u003c\/li\u003e \u003cli\u003e4x M4 bolts and nuts\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516462706974,"sku":"13580","price":1234.07,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC06549.jpg?v=1791779149"},{"product_id":"speed-engineering-13736-centre-console-with-adapter-passenger-side-for-toyota-gr86-zn8-gt86-zn6-subaru-brz-zc6-zd8","title":"SPEED ENGINEERING 13736 Centre Console with Adapter (Passenger Side) for TOYOTA GR86 (ZN8) \/ GT86 (ZN6) \/ SUBARU BRZ (ZC6 \/ ZD8)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13736 Centre Console with Adapter (Passenger Side) for TOYOTA GR86 (ZN8) \/ GT86 (ZN6) \/ SUBARU BRZ (ZC6 \/ ZD8)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13736 Centre Console with Adapter is designed for the passenger side of the TOYOTA GR86 ZN8, TOYOTA GT86 ZN6, SUBARU BRZ ZC6, and SUBARU BRZ ZD8. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Component shapes and cut-outs are based on calculated and simulated stress distribution under load. Measurement using a 3D laser scanner maximises the available installation space, reduces fastening material and installation effort, and supports smooth installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening\u003c\/li\u003e \u003cli\u003eDesigned to accommodate Recaro guide rails\u003c\/li\u003e \u003cli\u003eNot suitable for the Recaro Sportster CS\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accommodate Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x L-adapter, left\u003c\/li\u003e \u003cli\u003e1x L-adapter, right\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468637982,"sku":"13736","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/635356-speed-engineering-13735-1_1.jpg?v=1792034745"},{"product_id":"speed-engineering-13560-centre-console-with-adapter-drivers-side-for-audi-r8-4s-porsche-cayman-cayman-gt4-981-718-cayman-gt4-gt4-rs-982","title":"SPEED ENGINEERING 13560 Centre Console with Adapter (Driver's Side) for AUDI R8 (4S) \/ PORSCHE Cayman \/ Cayman GT4 (981) \/ 718 Cayman \/ GT4 \/ GT4 RS (982)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13560 Centre Console with Adapter (Driver's Side) for AUDI R8 (4S) \/ PORSCHE Cayman \/ Cayman GT4 (981) \/ 718 Cayman \/ GT4 \/ GT4 RS (982)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13560 Centre Console with Adapter is designed for the driver side of the AUDI R8 4S, PORSCHE Cayman 981, PORSCHE Cayman GT4 981, PORSCHE 718 Cayman 982, PORSCHE 718 Cayman GT4 982, and PORSCHE 718 Cayman GT4 RS 982. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Cut-outs and component shapes are based on calculated and simulated stress distribution under load. The installation space is measured beforehand using a 3D laser scanner to support smooth installation with reduced fastening material.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between mounting points help lower Torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with SPEED step belt mounting\u003c\/li\u003e \u003cli\u003eDesigned for Recaro guide rails\u003c\/li\u003e \u003cli\u003eRequires individual approval in accordance with §21 by TÜV\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Supports Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003cli\u003eHarness Compatibility: Expandable with SPEED step belt mounting\u003c\/li\u003e \u003cli\u003eRegistration Requirement: Individual approval in accordance with §21 by TÜV is required\u003c\/li\u003e \u003cli\u003eRoad Use: Motorsport products are not automatically approved under the Road Traffic Regulations (StVO)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468375838,"sku":"13560","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC00636.jpg?v=1791779138"},{"product_id":"speed-engineering-13346-ram-air-intake-system-for-bmw-m2-competition-f87","title":"SPEED ENGINEERING 13346 Ram Air Intake System for BMW M2 Competition (F87)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13346 Ram Air Intake System for BMW M2 Competition (F87)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13346 Ram air intake system is designed for the BMW M2 Competition F87 with the S55 engine. The system creates a passage to an area with cooler positive-pressure air, supporting the intake setup under racetrack use or after a performance upgrade.\u003c\/p\u003e \u003cp\u003eThe factory intake system ends directly behind the headlight, where air is heated by engine waste heat. The Ram air intake redirects the intake path toward the area behind the kidney grille, where the selected geometry helps prevent airflow restriction.\u003c\/p\u003e \u003cp\u003eOn each side, the rubber lip is removed from the OEM intake manifold and one section of the intake system is fitted. A hole is cut into the side wall behind the kidney grille using the supplied cutting template, and the second section is then bolted to the first. The parts are manufactured using a special process to provide a smooth surface and reduce air resistance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e The side wall behind the kidney grille must be cut using the supplied cutting template.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoadworthiness Note:\u003c\/strong\u003e Modification invalidates the vehicle’s roadworthiness certificate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the BMW M2 Competition F87 with the S55 engine\u003c\/li\u003e \u003cli\u003eCreates a passage to cooler positive-pressure air\u003c\/li\u003e \u003cli\u003eUses the intake area behind the kidney grille\u003c\/li\u003e \u003cli\u003eSelected geometry helps prevent airflow restriction\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eEngine Application: S55\u003c\/li\u003e \u003cli\u003eInstallation Area: Behind the kidney grille\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct connector\u003c\/li\u003e \u003cli\u003e1x right air duct connector\u003c\/li\u003e \u003cli\u003e1x left intake duct\u003c\/li\u003e \u003cli\u003e1x right intake duct\u003c\/li\u003e \u003cli\u003e1x cutting template\u003c\/li\u003e \u003cli\u003e4x screws and nuts\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":48516468506910,"sku":"13346","price":1460.54,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC09502.jpg?v=1791779141"},{"product_id":"speed-engineering-13688-seat-console-with-adapter-passenger-side-for-toyota-supra-mk5","title":"SPEED ENGINEERING 13688 Seat Console with Adapter (Passenger Side) for TOYOTA Supra (Mk5)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13688 Seat Console with Adapter (Passenger Side) for TOYOTA Supra (Mk5)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13688 Seat Console with Adapter is designed for the passenger side of the TOYOTA Supra Mk5. The seat mounting is a safety-critical component, and each component has undergone FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Component shapes and cut-outs are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to reduce fastening material, simplify installation, and maximise available space.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening\u003c\/li\u003e \u003cli\u003eDesigned to accept Recaro guide rails\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item number 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accept Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003cli\u003eRegistration Requirement: Individual approval in accordance with §21 by TÜV is required\u003c\/li\u003e \u003cli\u003eRoad Use: Motorsport products are not automatically approved under the Road Traffic Regulations (StVO)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":49029728764190,"sku":"13688","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/669811-speed-engineering-13688-1.jpg?v=1791989909"},{"product_id":"speed-engineering-13687-seat-console-with-adapter-drivers-side-for-toyota-supra-mk5","title":"SPEED ENGINEERING 13687 Seat Console with Adapter (Driver's Side) for TOYOTA Supra (Mk5)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13687 Seat Console with Adapter (Driver's Side) for TOYOTA Supra (Mk5)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13687 Seat Console with Adapter is designed for the driver’s side of the TOYOTA Supra Mk5. The seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation.\u003c\/p\u003e \u003cp\u003eThe console is designed to provide the lowest possible central seating position in front of the steering wheel. Component cut-outs and shapes are based on calculated and simulated stress distribution under load. The installation space is measured using a 3D laser scanner to reduce fastening material, lower installation effort, and maximise available space.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced lever arms between fixing points help lower torque loads on the components\u003c\/li\u003e \u003cli\u003eExpandable with step belt fastening for six-point harnesses\u003c\/li\u003e \u003cli\u003eDesigned to accommodate Recaro guide rails\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver’s side\u003c\/li\u003e \u003cli\u003eOptional Matching Rail: Item no. 13201\u003c\/li\u003e \u003cli\u003eRail Compatibility: Designed to accommodate Recaro guide rails\u003c\/li\u003e \u003cli\u003eRecaro Sportster CS Compatibility: Not suitable\u003c\/li\u003e \u003cli\u003eRegistration Requirement: Individual approval in accordance with §21 by TÜV is required\u003c\/li\u003e \u003cli\u003eRoad Use: Motorsport products are not automatically approved under the Road Traffic Regulations (StVO)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x seat console, driver or passenger\u003c\/li\u003e \u003cli\u003e1x left L-adapter\u003c\/li\u003e \u003cli\u003e1x right L-adapter\u003c\/li\u003e \u003cli\u003e1x pack of fixing materials\u003c\/li\u003e \u003cli\u003eInstructions for use on the product page\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":49029725290782,"sku":"13687","price":1382.16,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/669810-speed-engineering-13687-1.jpg?v=1791989613"},{"product_id":"speed-engineering-13855-electric-kit-for-electric-bmw-oem-slide-rails-for-bmw-m2-f87-g87-m3-f80-g80-m4-f82-g82","title":"SPEED ENGINEERING 13855 Electric Kit for Electric BMW OEM Slide Rails for BMW M2 (F87 \/ G87) \/ M3 (F80 \/ G80) \/ M4 (F82 \/ G82)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13855 Electric Kit for Electric BMW OEM Slide Rails for BMW M2 (F87 \/ G87) \/ M3 (F80 \/ G80) \/ M4 (F82 \/ G82)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13855 Electric Kit is designed for BMW OEM electric seat rails in BMW M2, M3, and M4 applications. It allows side adapters 13203 and 13204 to be used with BMW OEM electric seat rails, while the existing motor is controlled through the supplied switch.\u003c\/p\u003e \u003cp\u003eThe kit supports fitment of a Recaro Pole Position seat without an additional seat console or rail. The seat is positioned centrally in front of the steering wheel.\u003c\/p\u003e \u003cp\u003eOEM components are used during installation. The buckle and mounting remain in place, retaining the OEM harness and compatibility with 6-point harness upgrades.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Side adapters are not included and must be ordered separately.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for BMW OEM electric seat rails\u003c\/li\u003e \u003cli\u003eCompatible with side adapters 13203 and 13204\u003c\/li\u003e \u003cli\u003eExisting motor is controlled through the supplied switch\u003c\/li\u003e \u003cli\u003eRetains the buckle, mounting, and OEM harness\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSeat Compatibility: Recaro Pole Position\u003c\/li\u003e \u003cli\u003eAdapter Compatibility: Side adapter 13203 for the driver’s side, 13204 for the passenger side, or set 13252\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectric kit switch with cable connectors\u003c\/li\u003e \u003cli\u003eCable ties\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitment \/ Vehicle compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAll BMW F models\u003c\/li\u003e \u003cli\u003eAll BMW G models\u003c\/li\u003e \u003cli\u003eBMW E92 M3\u003c\/li\u003e \u003cli\u003eBMW E90 M3\u003c\/li\u003e \u003cli\u003eBMW E82 1 Series M\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":49349914165534,"sku":"13855","price":439.34,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/678287-speed-engineering-13855-1.jpg?v=1792036309"},{"product_id":"speed-engineering-13490-rear-axle-brake-cooling-kit-for-bmw-m2-m3-m4-f8x-g8x","title":"SPEED ENGINEERING 13490 Rear Axle Brake Cooling Kit for BMW M2 \/M3 \/M4 (F8x \/ G8x)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13490 Rear Axle Brake Cooling Kit for BMW M2 \/M3 \/M4 (F8x \/ G8x)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13490 Rear Axle Brake Cooling Kit is designed for BMW M2, M3, and M4 F8x \/ G8x models. On racing cars, the inner surface of the rear axle brake disc \/ brake rotor can reach extremely high temperatures despite brake upgrades. Large temperature differences between the inner and outer surfaces can lead to uneven brake pad wear.\u003c\/p\u003e \u003cp\u003eThe plug-and-play, wear-free cooling system requires no vehicle modifications, hoses, clamps, or additional accessories. It mounts using the original wishbone bolt points and shapes, channeling air directly into the inside of the rim via an air duct.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAnchor Plate Note:\u003c\/strong\u003e Removal or modification of the anchor plate is strongly recommended for maximum performance. Alternatively, a small window can be cut into the anchor plate, or several 10 mm holes can be drilled at specific locations.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for BMW M2, M3, and M4 F8x \/ G8x models\u003c\/li\u003e \u003cli\u003eDesigned to reduce excessive heat build-up and temperature differences between the inner and outer brake disc \/ brake rotor surfaces\u003c\/li\u003e \u003cli\u003ePlug-and-play, wear-free cooling system\u003c\/li\u003e \u003cli\u003eVery simple, tool-free installation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Rear axle\u003c\/li\u003e \u003cli\u003eMounting: Original wishbone bolt points and shapes\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play, tool-free\u003c\/li\u003e \u003cli\u003eInstallation Note: No vehicle modifications, hoses, clamps, or additional accessories required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct, left\u003c\/li\u003e \u003cli\u003e1x air duct, right\u003c\/li\u003e \u003cli\u003e6x cable ties\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":49478924992798,"sku":"13490","price":1179.79,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/speed-engineering-13490-01.jpg?v=1791779143"},{"product_id":"speed-engineering-13654-front-axle-brake-cooling-kit-for-toyota-supra-mk5-bmw-z4-g29","title":"SPEED ENGINEERING 13654 Front Axle Brake Cooling Kit for TOYOTA Supra (Mk5) \/ BMW Z4 (G29)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13654 Front Axle Brake Cooling Kit for TOYOTA Supra (Mk5) \/ BMW Z4 (G29)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13654 Front Axle Brake Cooling Kit is designed for the front axle of the TOYOTA Supra Mk5 and BMW Z4 G29. This redesigned generation provides improved clearance around the wheel rim while directing airflow to the brake disc \/ brake rotor area.\u003c\/p\u003e \u003cp\u003eThe system uses an air duct inlet and extension to guide air from the wheel arch area around the wheel and through one hose per side to the outlet. The wheel carrier-mounted outlet directs airflow toward the centre of the brake disc \/ brake rotor regardless of wheel position.\u003c\/p\u003e \u003cp\u003eExisting mounting points are used without permanent vehicle modifications. The short hose layout helps reduce airflow losses and hose strain.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e On some models, a small section of the wheel arch liner must be cut out to create space for the air duct and ensure tension-free installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the front axle of the TOYOTA Supra Mk5 and BMW Z4 G29\u003c\/li\u003e \u003cli\u003eRedesigned with improved clearance around the wheel rim\u003c\/li\u003e \u003cli\u003eOne hose per side connects the air duct inlet to the outlet\u003c\/li\u003e \u003cli\u003eAirflow direction remains independent of wheel position\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eAir Hose Length: 1 metre\u003c\/li\u003e \u003cli\u003eAdditional Front Axle Upgrade: Clubsport cooling kit available separately\u003c\/li\u003e \u003cli\u003eRear Axle Cooling System: Available separately\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet for front axle left\u003c\/li\u003e \u003cli\u003e1x air duct inlet for front axle right\u003c\/li\u003e \u003cli\u003e1x air duct outlet for front axle left\u003c\/li\u003e \u003cli\u003e1x air duct outlet for front axle right\u003c\/li\u003e \u003cli\u003e1x air hose, 1 metre\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":49687647813918,"sku":"13654","price":1875.84,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/691821-speed-engineering-13654-1.jpg?v=1791977535"},{"product_id":"speed-engineering-14464-front-axle-brake-cooling-kit-for-for-mercedes-benz-amg-gts","title":"SPEED ENGINEERING 14464 Front Axle Brake Cooling Kit for for MERCEDES-BENZ AMG GTS","description":"\u003ch2\u003eDescription SPEED ENGINEERING 14464 Front Axle Brake Cooling Kit for for MERCEDES-BENZ AMG GTS\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 14464 front axle brake cooling kit is designed for the MERCEDES-BENZ AMG GTS. The system uses the vehicle’s geometry to direct airflow beneath the underbody toward the centre of the brake disc \/ brake rotor, helping reduce brake temperatures with cooler air.\u003c\/p\u003e \u003cp\u003eThe cooling system is compatible with the Tikt Performance solution. Both systems can be used simultaneously, while the SPEED ENGINEERING kit can also be installed and used independently. A rear axle version is also available.\u003c\/p\u003e \u003cp\u003eThe kit is designed for plug-and-play installation and reversible fitment, providing brake cooling support with minimal installation effort.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e No brake dismantling is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models may vary in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFront axle brake cooling kit designed for the MERCEDES-BENZ AMG GTS\u003c\/li\u003e \u003cli\u003eUses vehicle geometry to direct airflow beneath the underbody\u003c\/li\u003e \u003cli\u003eDirects cooler air toward the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003cli\u003eCompatible with the Tikt Performance solution or independent use\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play\u003c\/li\u003e \u003cli\u003eFitment Type: Reversible\u003c\/li\u003e \u003cli\u003eCompatibility: Tikt Performance solution\u003c\/li\u003e \u003cli\u003eAdditional Version: Rear axle version available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct\u003c\/li\u003e \u003cli\u003e1x right air duct\u003c\/li\u003e \u003cli\u003eMounting hardware\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50278064980254,"sku":"14464","price":1184.73,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/667855-speed-engineering-14464-1_a5f76880-5d78-403f-8b18-55d7820ea40f.jpg?v=1792060586"},{"product_id":"speed-engineering-14467-rear-axle-brake-cooling-kit-for-mercedes-benz-amg-gts","title":"SPEED ENGINEERING 14467 Rear Axle Brake Cooling Kit for MERCEDES-BENZ AMG GTS","description":"\u003ch2\u003eDescription SPEED ENGINEERING 14467 Rear Axle Brake Cooling Kit for MERCEDES-BENZ AMG GTS\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 14467 Rear Axle Brake Cooling Kit is designed for the MERCEDES-BENZ AMG GTS. The cooling system uses the vehicle’s geometry to direct airflow beneath the underbody toward the centre of the brake disc \/ brake rotor, helping reduce brake temperatures with cooler air.\u003c\/p\u003e \u003cp\u003eThe cooling system is compatible with the Tikt Performance solution. Both systems can be used simultaneously, while the SPEED ENGINEERING kit can also be installed and used independently.\u003c\/p\u003e \u003cp\u003eThe kit is designed for plug-and-play installation and can be reverted to stock. Installation does not require brake dismantling.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models may vary in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRear axle brake cooling kit designed for the MERCEDES-BENZ AMG GTS\u003c\/li\u003e \u003cli\u003eDirects cooler airflow toward the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003cli\u003eCompatible with the Tikt Performance solution or independent use\u003c\/li\u003e \u003cli\u003ePlug-and-play installation that can be reverted to stock\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Rear axle\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play\u003c\/li\u003e \u003cli\u003eFitment \/ Vehicle compatibility: Reversible to stock\u003c\/li\u003e \u003cli\u003eCompatibility: Tikt Performance solution\u003c\/li\u003e \u003cli\u003eInstallation Note: No brake dismantling required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct\u003c\/li\u003e \u003cli\u003e1x right air duct\u003c\/li\u003e \u003cli\u003eMounting hardware\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50278065340702,"sku":"14467","price":1184.73,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/668183-speed-engineering-14467-1.jpg?v=1792061030"},{"product_id":"speed-engineering-15021-canard-kit-for-bmw-m3-m4-f80-f82","title":"SPEED ENGINEERING 15021 Canard Kit for BMW M3 \/ M4 (F80 \/ F82)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 15021 Canard Kit for BMW M3 \/ M4 (F80 \/ F82)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 15021 Canard Kit is designed for the BMW M3 F80 and BMW M4 F82. The canards redirect airflow around turbulent air generated by the front wheels, increasing downforce on the front axle and providing a racing appearance.\u003c\/p\u003e \u003cp\u003eThe canards are supplied unpainted, and painting is recommended for a clean finish. The kit includes a TÜV parts certificate when the chassis number is provided during ordering. Road-legal and TÜV-compliant installation requires bolting using the supplied plastic insert nuts and bolts, while strong 3M adhesive tape may also be used for attachment.\u003c\/p\u003e \u003cp\u003eThe canards only fit the bumper shown in the product images or the OEM bumper without carbon extensions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle compatibility Note:\u003c\/strong\u003e Minimal gaps may occur due to soft inner bumper surfaces and manufacturing tolerances; these can generally be corrected with a small bead of silicone.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCanard kit designed for the BMW M3 F80 and BMW M4 F82\u003c\/li\u003e \u003cli\u003eIncreases downforce on the front axle\u003c\/li\u003e \u003cli\u003eRedirects airflow around turbulence generated by the front wheels\u003c\/li\u003e \u003cli\u003eDesigned for road-legal use with TÜV registration\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFinish: Unpainted\u003c\/li\u003e \u003cli\u003eCertification: TÜV parts certificate available when the chassis number is provided\u003c\/li\u003e \u003cli\u003eRoad Use: Road-legal with TÜV-compliant bolting\u003c\/li\u003e \u003cli\u003eAttachment Method: Plastic insert nuts and bolts or strong 3M adhesive tape\u003c\/li\u003e \u003cli\u003eTÜV-Compliant Attachment Method: Bolting\u003c\/li\u003e \u003cli\u003eInstallation Requirement: The correct position must be marked before securing the canards\u003c\/li\u003e \u003cli\u003eFitment \/ Vehicle compatibility: Fits only the bumper shown in the product images or the OEM bumper without carbon extensions\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic insert nuts and bolts\u003c\/li\u003e \u003cli\u003eTÜV parts certificate when the chassis number is provided\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50278066553118,"sku":"15021","price":937.89,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/694123-speed-engineering-15021-1.jpg?v=1792145353"},{"product_id":"speed-engineering-15355-chassis-mounted-splitter-for-bmw-m3-f80-m4-f82","title":"SPEED ENGINEERING 15355 Chassis Mounted Splitter for BMW M3 (F80) \/ M4 (F82)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 15355 Chassis Mounted Splitter for BMW M3 (F80) \/ M4 (F82)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 15355 Chassis Mounted Splitter is designed for the BMW M3 F80 and BMW M4 F82. The adjustable splitter board can be set in a retracted position for legal overhang length or an extended position for use outside public roads.\u003c\/p\u003e \u003cp\u003eThe chassis-mounted SPEED Splitter transfers professional motorsport aerodynamic technology to the vehicle. Compared with bonded lips, the concept optimises the ratio between low aerodynamic drag and increased downforce. Full carbon fibre construction with laminated, milled aluminium brackets keeps the structure lightweight and rigid.\u003c\/p\u003e \u003cp\u003eThe custom-made carbon lip follows the bumper shape and acts as an air dam. Aluminium brackets matched to the front carrier transfer generated downforce to the front axle, while six mounting points distribute forces across the splitter board.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e The carbon lip must not be installed without the supplied splitter board.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility Note:\u003c\/strong\u003e Not compatible with carbon add-on pieces.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the BMW M3 F80 and BMW M4 F82\u003c\/li\u003e \u003cli\u003eSplitter board includes a rigid core and embedded milled components for adjustment guidance\u003c\/li\u003e \u003cli\u003eCarbon lip is bolted and bonded with double-sided adhesive tape\u003c\/li\u003e \u003cli\u003eSupplied with a parts certificate\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMaterial: Full carbon fibre with laminated, milled aluminium brackets\u003c\/li\u003e \u003cli\u003eFinish: Glossy clear coat splitter lip; unpainted matt carbon splitter board\u003c\/li\u003e \u003cli\u003eAdjustment: Extendable splitter board\u003c\/li\u003e \u003cli\u003eMounting: Chassis-mounted with aluminium brackets matched to the front carrier\u003c\/li\u003e \u003cli\u003eMounting Points: Six mounting points on the splitter board\u003c\/li\u003e \u003cli\u003eAttachment: Bolted and bonded with double-sided adhesive tape\u003c\/li\u003e \u003cli\u003eCertification: Parts certificate included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSplitter lip\u003c\/li\u003e \u003cli\u003eSplitter board and brackets\u003c\/li\u003e \u003cli\u003eFastening hardware\u003c\/li\u003e \u003cli\u003eDouble-sided adhesive tape\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50278066585886,"sku":"15355","price":8638.65,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/695420-speed-engineering-15355-1.jpg?v=1792381706"},{"product_id":"speed-engineering-15530-rear-axle-brake-cooling-kit-for-bmw-1-series-f20-f21-toyota-gr-supra-a90-a91","title":"SPEED ENGINEERING 15530 Rear Axle Brake Cooling Kit for BMW 1 Series (F20 \/ F21) \/ TOYOTA GR Supra (A90 \/ A91)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 15530 Rear Axle Brake Cooling Kit for BMW 1 Series (F20 \/ F21) \/ TOYOTA GR Supra (A90 \/ A91)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 15530 Rear Axle Brake Cooling Kit is designed for the BMW 1 Series F20 \/ F21 and TOYOTA GR Supra A90 \/ A91. On race cars, the inner surface of the rear brake disc can reach extremely high temperatures, even with upgraded brakes. The temperature difference between the inner and outer surfaces can cause uneven brake pad wear.\u003c\/p\u003e \u003cp\u003eThe plug-and-play solution requires no vehicle modifications, hoses, clamps, or additional accessories. The system uses the original mounting points on the control arm and channels air directly into the inside of the wheel through a flow duct.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRecommendation:\u003c\/strong\u003e Removal or modification of the anchor plate is strongly recommended.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eVehicle Compatibility Note:\u003c\/strong\u003e Models may vary slightly in wheel position, suspension geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final 1\/4 of steering travel should be avoided.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for rear axle brake cooling on the BMW 1 Series F20 \/ F21 and TOYOTA GR Supra A90 \/ A91\u003c\/li\u003e \u003cli\u003eReduces thermal load on the inner surface of the rear brake disc\u003c\/li\u003e \u003cli\u003eHelps reduce uneven brake pad wear caused by temperature differences\u003c\/li\u003e \u003cli\u003eWear-free, plug-and-play system using the original control arm mounting points\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Rear axle\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play\u003c\/li\u003e \u003cli\u003eMounting: Original mounting points on the control arm\u003c\/li\u003e \u003cli\u003eFlow: Air is directed into the inside of the wheel through a flow duct\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x rear axle brake cooling left\u003c\/li\u003e \u003cli\u003e1x rear axle brake cooling right\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50278068289822,"sku":"15530","price":987.29,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/697758-speed-engineering-15530-1.jpg?v=1792382369"},{"product_id":"speed-engineering-16825-1-side-adapter-for-seat-rail-recaro-pole-position-recaro-podium-drivers-side-for-bmw-1-2-3-series-m2-m3-m4-z4-gx-fx-e8x-e9x","title":"SPEED ENGINEERING 16825.1 Side Adapter for Seat Rail Recaro Pole Position \/ Recaro Podium (Driver's Side) for BMW 1\/2\/3 Series\/M2\/M3\/M4\/Z4 (Gx\/Fx\/E8x\/E9x)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 16825.1 Side Adapter for Seat Rail Recaro Pole Position \/ Recaro Podium (Driver's Side) for BMW 1\/2\/3 Series\/M2\/M3\/M4\/Z4 (Gx\/Fx\/E8x\/E9x)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 16825.1 Side Adapter for Seat Rail is designed for the driver side of BMW 1\/2\/3 Series, M240i, M340i, M440i, M2, M3, M4, and Z4 models from the Gx, Fx, E8x, and E9x platforms. It allows Recaro Pole Position or Recaro Podium seats to be fitted to the original mechanical seat rail of a BMW vehicle.\u003c\/p\u003e \u003cp\u003eThe seat mounting is a safety-critical component developed with FEM simulation to support safety and weight optimisation. It provides the lowest possible seating position while keeping the seat centred in front of the steering wheel. Component cut-outs and shapes are based on calculated and simulated stress distribution under load, while the installation space is measured beforehand using a 3D laser scanner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eElectric Seat Rail Note:\u003c\/strong\u003e For electric seat rails, a separate version with its own seat console is available under item 13211, and an additional electric motor control kit is available under item 13855.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCoding Note:\u003c\/strong\u003e Seat and airbag coding is currently possible only for F Series vehicles and is required only if the seats or belts are changed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Note:\u003c\/strong\u003e Registration of the seat console, including the seats, is possible only for vehicles up to model year 2024. Later vehicles require the complete seat console.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval under Section 21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved for road use under German road traffic regulations.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for BMW OEM mechanical seat rails on the driver side\u003c\/li\u003e \u003cli\u003eAllows installation of Recaro Pole Position and Recaro Podium seats\u003c\/li\u003e \u003cli\u003eReduced fastening material and installation effort through maximum use of the available space\u003c\/li\u003e \u003cli\u003eReduced lever arms between mounting points help lower Torque loads on the components\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Driver side\u003c\/li\u003e \u003cli\u003eSeat Rail Compatibility: BMW OEM mechanical seat rail\u003c\/li\u003e \u003cli\u003eSeat Compatibility: Recaro Pole Position; Recaro Podium\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x adapter set\u003c\/li\u003e \u003cli\u003e1x package of fastening hardware\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50439473070366,"sku":"16825.1","price":937.89,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/717212-speed-engineering-16825-1-1.jpg?v=1792393729"},{"product_id":"speed-engineering-16826-1-side-adapter-for-seat-rail-recaro-pole-position-recaro-podium-passenger-side-for-bmw-1-2-3-series-m2-m3-m4-z4-gx-fx-e8x-e9x","title":"SPEED ENGINEERING 16826.1 Side Adapter for Seat Rail Recaro Pole Position \/ Recaro Podium (Passenger Side) for BMW 1\/2\/3 Series\/M2\/M3\/M4\/Z4 (Gx\/Fx\/E8x\/E9x)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 16826.1 Side Adapter for Seat Rail Recaro Pole Position \/ Recaro Podium (Passenger Side) for BMW 1\/2\/3 Series\/M2\/M3\/M4\/Z4 (Gx\/Fx\/E8x\/E9x)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 16826.1 Side Adapter for Seat Rail is designed for the passenger side of BMW 1\/2\/3 Series, M240i, M340i, M440i, M2, M3, M4, and Z4 models on Gx, Fx, E8x, and E9x platforms. It allows a Recaro Pole Position seat to be fitted to the original mechanical seat rail of a BMW vehicle.\u003c\/p\u003e \u003cp\u003eThe seat mounting is a safety-critical component developed using FEM simulation to support safety and weight optimisation. The design provides the lowest possible seating position while keeping the seat centred in front of the steering wheel. Component cut-outs and shapes are based on calculated and simulated stress distribution under load, while the installation space is measured beforehand using a 3D laser scanner.\u003c\/p\u003e \u003cp\u003eThe adapter is intended for mechanical seat rails. For electric seat rails, a separate version with its own seat console is available under item 13212, and an additional electric motor control kit is available under item 13855.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Note:\u003c\/strong\u003e Registration of the seat console, including the seats, is only possible for vehicles up to model year 2024. Later vehicles require the complete seat console.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval under Section 21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved for road use under German road traffic regulations.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Fee Note:\u003c\/strong\u003e The flat-rate TÜV registration fee is charged only once when driver- and passenger-side sets are ordered together.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePassenger-side adapter designed for BMW OEM mechanical seat rails and Recaro Pole Position seats\u003c\/li\u003e \u003cli\u003eDesigned for the lowest possible seating position while keeping the seat centred in front of the steering wheel\u003c\/li\u003e \u003cli\u003eReduced fastening material and installation effort through maximum use of the available space\u003c\/li\u003e \u003cli\u003eReduced lever arms between mounting points help lower Torque loads on the components\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Passenger side\u003c\/li\u003e \u003cli\u003eSeat Rail Compatibility: BMW OEM mechanical seat rail\u003c\/li\u003e \u003cli\u003eSeat Compatibility: Recaro Pole Position\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x adapter set\u003c\/li\u003e \u003cli\u003e1x package of fastening hardware\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50439525794078,"sku":"16826.1","price":937.89,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/717213-speed-engineering-16826-1-1.jpg?v=1792390681"},{"product_id":"speed-engineering-14311-front-to-rear-brake-cooling-kit-for-bmw-1-series-f20-f21-m2-m3-m4-f8x-g8x-z4-g29-toyota-supra-mk5","title":"SPEED ENGINEERING 14311 Front-to-Rear Brake Cooling Kit for BMW 1 Series (F20\/F21)\/ M2 \/ M3 \/M4 (F8x \/ G8x) \/ Z4 (G29) \/ TOYOTA Supra (Mk5)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 14311 Front-to-Rear Brake Cooling Kit for BMW 1 Series (F20\/F21)\/ M2 \/ M3 \/M4 (F8x \/ G8x) \/ Z4 (G29) \/ TOYOTA Supra (Mk5)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 14311 Brake Cooling Kit is a Clubsport set designed for BMW 1 Series F20\/F21, BMW M2, M3, and M4 models F87, F80, F82, G87, G80, and G82, BMW Z4 G29, and Toyota Supra MK5. The set provides simple, tool-free installation for everyday use and can be combined with the Track Set.\u003c\/p\u003e \u003cp\u003eMost vehicles have limited brake cooling on the front axle and usually no cooling on the rear axle. The component geometry fits the wishbones of BMW M2, M3, and M4 G-series models, while the flat inlets redirect airflow beneath the vehicle toward the centre of the rotating wheel.\u003c\/p\u003e \u003cp\u003eThe universal rear axle cooling system was developed and tested on various vehicles. Testing showed a peak temperature difference of up to 50°C with the anchor plate fitted, while drilling holes in or removing the anchor plate produced a difference of up to 200°C.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eInstallation does not require wheel removal; a jack is sufficient\u003c\/li\u003e \u003cli\u003ePlug-and-play installation using cable ties\u003c\/li\u003e \u003cli\u003eA continuous taper between the inlet and outlet accelerates airflow while maintaining the same volume\u003c\/li\u003e \u003cli\u003eManufactured from PA12 plastic with integrated mounting slots\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSet Type: Clubsport set\u003c\/li\u003e \u003cli\u003eInstallation Position: Front-to-rear\/rear axle cooling\u003c\/li\u003e \u003cli\u003eMaterial: PA12 plastic\u003c\/li\u003e \u003cli\u003eMounting: Integrated mounting slots with cable ties\u003c\/li\u003e \u003cli\u003eInstallation Note: Tool-free plug-and-play installation; wheel removal is not required, and a jack is sufficient\u003c\/li\u003e \u003cli\u003eTemperature Test Result: Up to 50°C peak difference with the anchor plate fitted; up to 200°C difference when drilling holes in or removing the anchor plate\u003c\/li\u003e \u003cli\u003eCompatibility Note: Component geometry fits the wishbones of BMW M2, M3, and M4 G-series models\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x brake cooling L\u003c\/li\u003e \u003cli\u003e1x brake cooling R\u003c\/li\u003e \u003cli\u003e6x cable ties\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50595837608222,"sku":"14311","price":888.54,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/720238--speed-engineering-14311-1.jpg?v=1792059630"},{"product_id":"speed-engineering-13201-universal-seat-rail","title":"SPEED ENGINEERING 13201 Universal Seat Rail","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13201 Universal Seat Rail\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13201 Universal Seat Rail is designed for seat mounting applications within compatible seat installation setups.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUniversal seat rail\u003c\/li\u003e \u003cli\u003eDesigned for seat mounting applications\u003c\/li\u003e \u003cli\u003eSuitable for compatible seat installation setups\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50602386227486,"sku":"13201","price":246.8,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/662803-speed-engineering-13201-1.jpg?v=1791861545"},{"product_id":"speed-engineering-13258-front-brake-cooling-kit-for-bmw-m2-competition-m2-cs-f87n","title":"SPEED ENGINEERING 13258 Front Brake Cooling Kit for BMW M2 Competition \/ M2 CS (F87N)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13258 Front Brake Cooling Kit for BMW M2 Competition \/ M2 CS (F87N)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13258 Front Brake Cooling Kit is designed specifically for the BMW M2 Competition (F87N) and M2 CS to improve brake cooling efficiency during spirited road driving and track use. The system extends the factory brake cooling airflow path by directing air from the original front bumper ducts toward the brake cooling outlets through dedicated extension ducts and hoses.\u003c\/p\u003e \u003cp\u003eWhile the factory M2 Competition is equipped with brake cooling inlets, the airflow is discharged into the wheel arch area. SPEED ENGINEERING developed extension ducts to guide this airflow more efficiently around the wheel and toward the brake cooling system, reducing turbulence and improving airflow utilization. The components are designed for straightforward installation using the existing factory ducting.\u003c\/p\u003e \u003cp\u003ePlease note that wheel position, suspension geometry, wheel offset, and tire dimensions may vary between vehicles. Under certain combinations, slight contact may occur at full steering lock during low-speed maneuvering. The inlet ducts may be supplied in grey, which may differ from the product images.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned specifically for BMW M2 Competition (F87N) and M2 CS\u003c\/li\u003e \u003cli\u003eExtends the factory brake cooling airflow path\u003c\/li\u003e \u003cli\u003eUtilizes the original front bumper air inlets\u003c\/li\u003e \u003cli\u003eImproves airflow direction toward brake cooling outlets\u003c\/li\u003e \u003cli\u003eReduces turbulence within the wheel arch area\u003c\/li\u003e \u003cli\u003eDesigned for straightforward installation\u003c\/li\u003e \u003cli\u003eCompatible with factory brake cooling duct locations\u003c\/li\u003e \u003cli\u003eSuitable for road and track driving applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eIncluded Components: Left air duct inlet, right air duct inlet\u003c\/li\u003e \u003cli\u003eNote: Inlet ducts may be supplied in grey\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50750713004318,"sku":"13258","price":2215.97,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/520857_fw9M_13258-1.jpg?v=1780056712"},{"product_id":"speed-engineering-13310-brake-cooling-inlet-for-bmw-1-series-pre-facelift-f20-f21","title":"SPEED ENGINEERING 13310 Brake Cooling Inlet for BMW 1 Series Pre-Facelift (F20 \/ F21)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13310 Brake Cooling Inlet for BMW 1 Series Pre-Facelift (F20 \/ F21)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13310 Brake Cooling Inlet is designed for the BMW 1 Series F20\/F21 pre-facelift model with an M Package bumper. It is intended for regular track use and supports effective brake cooling under high thermal load.\u003c\/p\u003e \u003cp\u003eThe track kit uses flow-optimised funnels that replace the original inlet funnels in the front bumper and the brake air duct. Each inlet features a conventional 51 mm ventilation hose connection for routing airflow toward the brake cooling outlet.\u003c\/p\u003e \u003cp\u003eBrake cooling can improve braking performance and reduce wear of friction components under moderate and track loads. Matching anchor plates are available separately as brake cooling outlets for BMW F Series applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle compatibility:\u003c\/strong\u003e Models may vary in wheel position, suspension geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final 1\/4 of steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBrake cooling inlet designed for the BMW 1 Series F20\/F21 pre-facelift model\u003c\/li\u003e \u003cli\u003eDesigned for vehicles with an M Package bumper and regular track use\u003c\/li\u003e \u003cli\u003eFlow-optimised funnels replace the original front bumper inlet funnels and brake air duct\u003c\/li\u003e \u003cli\u003eConventional 51 mm ventilation hose connection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front bumper air duct inlet\u003c\/li\u003e \u003cli\u003eFront Bumper Compatibility: M Package bumper\u003c\/li\u003e \u003cli\u003eAir Hose Connection: 51 mm ventilation hose connection\u003c\/li\u003e \u003cli\u003eUse Case: Regular track use\u003c\/li\u003e \u003cli\u003eMatching Outlet: Brake cooling outlet suitable for BMW F Series, available separately\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct inlet\u003c\/li\u003e \u003cli\u003e1x right air duct inlet\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50750725062942,"sku":"13310","price":951.84,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/597052-speed-engineering-13310-1.jpg?v=1791872846"},{"product_id":"speed-engineering-13322-brake-cooling-kit-for-bmw-1-series-lci-m-sport-f20-f21","title":"SPEED ENGINEERING 13322 Brake Cooling Kit for BMW 1 Series LCI M Sport (F20 \/ F21)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13322 Brake Cooling Kit for BMW 1 Series LCI M Sport (F20 \/ F21)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13322 Brake Cooling Kit is designed for the BMW 1 Series LCI M Sport F20 \/ F21 with M Package bumper. The system is intended for regular track use and provides maximum cooling performance.\u003c\/p\u003e \u003cp\u003eFlow-optimised funnels replace the original inlet funnels in the front bumper and connect to the air ducts using classic 51 mm ventilation hoses. This allows airflow to be guided from the front bumper toward the brake cooling outlets.\u003c\/p\u003e \u003cp\u003eThe airflow is channelled toward the centre of the brake disc \/ brake rotor to use the turbine effect and cool the disc from the inside out. The specific flow angle minimises air loss and uses the available air volume efficiently. The lightweight, powder-coated aluminium construction provides strength and durability.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport products are not automatically approved under the Road Traffic Regulations (StVO).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRegistration Requirement:\u003c\/strong\u003e Individual approval in accordance with §21 by TÜV is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch the air duct at full steering lock when parking.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for BMW 1 Series LCI M Sport F20 \/ F21 models with M Package bumper\u003c\/li\u003e \u003cli\u003eSuitable for xDrive and rear-wheel-drive facelift models\u003c\/li\u003e \u003cli\u003eFlow-optimised air duct inlets replace the original front bumper inlet funnels\u003c\/li\u003e \u003cli\u003eAirflow is directed toward the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003cli\u003eVentilation Hose Connection: 51 mm\u003c\/li\u003e \u003cli\u003eAir Hose Length: 2 metres total\u003c\/li\u003e \u003cli\u003eFront Bumper Compatibility: M Package bumper\u003c\/li\u003e \u003cli\u003eUse Case: Regular track use\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x front axle air duct inlet, left\u003c\/li\u003e \u003cli\u003e1x front axle air duct inlet, right\u003c\/li\u003e \u003cli\u003e1x front axle mounting plate, left\u003c\/li\u003e \u003cli\u003e1x front axle mounting plate, right\u003c\/li\u003e \u003cli\u003e2x air hoses\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eVehicle Compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBMW F20 \/ F21 facelift models with M Package bumper, xDrive and rear-wheel drive\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50752942670110,"sku":"13322","price":1959.11,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/520855_X1sY_13322-1.jpg?v=1791873146"},{"product_id":"speed-engineering-13445-brake-cooling-kit-for-ford-fiesta-st-mk7-b299","title":"SPEED ENGINEERING 13445 Brake Cooling Kit for FORD Fiesta ST Mk7 (B299)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13445 Brake Cooling Kit for FORD Fiesta ST Mk7 (B299)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13445 Brake Cooling Kit is designed for the FORD Fiesta ST Mk7 B299. The kit cools the brakes as efficiently as possible while using a wear-free hose mounting concept.\u003c\/p\u003e \u003cp\u003eThe inlet system channels airflow beneath the vehicle through integrated underbody inlets. These inlets provide an effective flow area without forming the lowest point of the vehicle.\u003c\/p\u003e \u003cp\u003eThe outlet is mounted on the wishbone and directs airflow toward the centre of the brake disc \/ brake rotor regardless of wheel position. This layout uses the turbine effect of the brake disc \/ brake rotor for internal cooling, uses existing locking pins for attachment, and requires no permanent vehicle modifications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for efficient brake cooling\u003c\/li\u003e \u003cli\u003eWear-free hose mounting concept\u003c\/li\u003e \u003cli\u003eIntegrated underbody inlets channel airflow beneath the vehicle\u003c\/li\u003e \u003cli\u003eCooling airflow remains independent of wheel position\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMounting: Wishbone-mounted outlet with existing locking pins\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50752953286942,"sku":"13445","price":1259.04,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC00617.jpg?v=1791779143"},{"product_id":"speed-engineering-13512-brake-cooling-kit-for-fiat-abarth-500","title":"SPEED ENGINEERING 13512 Brake Cooling Kit for FIAT Abarth 500","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13512 Brake Cooling Kit for FIAT Abarth 500\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13512 Brake Cooling Kit is designed to cool the FIAT Abarth 500 brakes efficiently using a wear-free hose mounting system. Wheel position has no effect on hose movement.\u003c\/p\u003e \u003cp\u003eMaximum airflow is taken from the front of the vehicle through plug-and-play funnels developed for the side bumper openings. The inlet geometry provides the correct curvature for collision-free hose installation. The outlet mounts to the wishbone and directs airflow to the centre of the brake disc \/ brake rotor regardless of wheel position, using the turbine effect of the disc.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWear-free hose mounting system unaffected by wheel position\u003c\/li\u003e \u003cli\u003ePlug-and-play funnels developed for the side bumper openings\u003c\/li\u003e \u003cli\u003eWishbone-mounted outlet directs airflow to the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003cli\u003eSecured using existing locking pins with no permanent vehicle modifications required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAir Hose Length: 1 metre\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct outlet\u003c\/li\u003e \u003cli\u003e1x right air duct outlet\u003c\/li\u003e \u003cli\u003e1x left air duct inlet\u003c\/li\u003e \u003cli\u003e1x right air duct inlet\u003c\/li\u003e \u003cli\u003e1x hose, 1 metre\u003c\/li\u003e \u003cli\u003e4x mounting clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":50752965902622,"sku":"13512","price":1327.88,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC00385.jpg?v=1791779144"},{"product_id":"speed-engineering-14084-front-axle-brake-cooling-kit-for-hyundai-i30n-pd","title":"SPEED ENGINEERING 14084 Front Axle Brake Cooling Kit for HYUNDAI I30N (PD)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 14084 Front Axle Brake Cooling Kit for HYUNDAI I30N (PD)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 14084 Front Axle Brake Cooling Kit is designed for the HYUNDAI i30 N PD. The cooling system channels air from the front bumper area to the brake ventilation outlet, helping prevent uncontrolled airflow swirl inside the wheel arch.\u003c\/p\u003e \u003cp\u003eGeneration 2 retains the OEM ducts and uses air intake funnels mounted beneath the wishbone. An opening with a hose connection through the wishbone connects the air intake area to the anchor plate using a short air hose. This layout reduces flow losses, improves wear resistance, helps prevent damage during full steering wheel turns, and simplifies installation.\u003c\/p\u003e \u003cp\u003eThe outlet directs airflow toward the brake disc \/ brake rotor at a defined angle to minimise airflow loss and use the available air volume efficiently. The lightweight, powder-coated aluminium anchor plate provides strength and durability, while additional shielding protects the suspension joint bearing from brake heat and helps increase its service life.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Differences in wheel position, suspension geometry, and wheel and tyre combinations may require clearance checks. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eComplete front axle brake cooling system for the HYUNDAI i30 N PD\u003c\/li\u003e \u003cli\u003eRetains OEM ducts with wishbone-mounted air intake funnels\u003c\/li\u003e \u003cli\u003eShort air hose design reduces flow losses and improves wear resistance\u003c\/li\u003e \u003cli\u003eDefined airflow angle enables efficient use of the available air volume\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x anchor plate, left\u003c\/li\u003e \u003cli\u003e1x anchor plate, right\u003c\/li\u003e \u003cli\u003e1x inlet duct, left\u003c\/li\u003e \u003cli\u003e1x inlet duct, right\u003c\/li\u003e \u003cli\u003e3x air hose, 3 metres\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":60084216987934,"sku":"14084","price":1673.41,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/702080-speed-engineering-14084-1.jpg?v=1792045464"},{"product_id":"speed-engineering-13528-brake-cooling-kit-for-ford-fiesta-st-mk8-b479","title":"SPEED ENGINEERING 13528 Brake Cooling Kit for FORD Fiesta ST Mk8 (B479)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13528 Brake Cooling Kit for FORD Fiesta ST Mk8 (B479)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13528 Brake Cooling Kit is designed for the FORD Fiesta ST Mk8 B479. The cooling system cools the brakes efficiently using a wear-free hose mounting system.\u003c\/p\u003e \u003cp\u003eThe air intakes replace the fog lights with plug-and-play components to capture maximum airflow at the front of the vehicle. Their curvature enables collision-free hose installation, and wheel position has no influence on hose movement.\u003c\/p\u003e \u003cp\u003eThe cooling system mounts to the wishbone and directs airflow toward the centre of the brake disc \/ brake rotor regardless of wheel position. This layout uses the turbine effect of the brake disc \/ brake rotor and provides central cooling. Installation uses existing locking pins and requires no permanent vehicle modifications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle compatibility Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the FORD Fiesta ST Mk8 B479\u003c\/li\u003e \u003cli\u003eWear-free hose mounting system\u003c\/li\u003e \u003cli\u003ePlug-and-play air intakes replace the fog lights\u003c\/li\u003e \u003cli\u003eWishbone-mounted outlet directs airflow toward the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMounting: Wishbone-mounted outlet with existing locking pins\u003c\/li\u003e \u003cli\u003eInstallation Type: Plug-and-play air intakes replacing the fog lights\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":60084217020702,"sku":"13528","price":1426.62,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/DSC04139.jpg?v=1791779145"},{"product_id":"speed-engineering-13990-brake-cooling-kit-for-toyota-gr-yaris","title":"SPEED ENGINEERING 13990 Brake Cooling Kit for TOYOTA GR Yaris","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13990 Brake Cooling Kit for TOYOTA GR Yaris\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13990 Brake Cooling Kit is designed for the TOYOTA GR Yaris and regular track use. It supports brake temperature management by directing airflow to the front axle brake disc while retaining the original cooling system.\u003c\/p\u003e \u003cp\u003eThe air duct inlet is positioned in a recess beneath the vehicle and does not form its lowest point. The original brake cooling system remains in place, increasing cooling capacity instead of replacing the existing airflow path.\u003c\/p\u003e \u003cp\u003eThe air duct outlet directs airflow toward the centre of the brake disc, using the turbine effect to cool the disc from the inside. The defined airflow angle reduces airflow loss. The wishbone-mounted outlet allows the short air hose to remain stable with minimal movement and reduced wear.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle compatibility Note:\u003c\/strong\u003e Wheel position varies slightly between models, chassis geometries, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final quarter of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for regular track use\u003c\/li\u003e \u003cli\u003eRetains the original brake cooling system\u003c\/li\u003e \u003cli\u003eDirects airflow toward the centre of the brake disc\u003c\/li\u003e \u003cli\u003eShort air hose layout helps prevent kinking and wear\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eAir Hose Length: 0.5 m\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet for the front axle, left\u003c\/li\u003e \u003cli\u003e1x air duct inlet for the front axle, right\u003c\/li\u003e \u003cli\u003e1x mounting plate for the front axle, left\u003c\/li\u003e \u003cli\u003e1x mounting plate for the front axle, right\u003c\/li\u003e \u003cli\u003e1x air hose, 0.5 m\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003cli\u003e6x mounting clips\u003c\/li\u003e \u003cli\u003e2x hose guides\u003c\/li\u003e \u003c\/ul\u003e ","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":60084217053470,"sku":"13990","price":1332.82,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/707413-speed-engineering-13990-1.jpg?v=1792039841"},{"product_id":"speed-engineering-13545-brake-cooling-kit-for-bmw-1-series-e82-e88-not-m","title":"SPEED ENGINEERING 13545 Brake Cooling Kit for BMW 1 Series (E82 \/ E88) (Not M)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13545 Brake Cooling Kit for BMW 1 Series (E82 \/ E88) (Not M)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13545 Brake Cooling Kit is designed for BMW 1 Series E82 \/ E88 models with M Package bumpers, excluding the 1 Series M Coupé. The replacement air duct fits in place of the OEM duct and connects to the anchor plate through a hose connection.\u003c\/p\u003e \u003cp\u003eThe anchor plate channels airflow toward the centre of the brake disc \/ brake rotor, using the turbine effect to cool the disc from the inside. Airflow is directed at a defined angle to reduce energy loss and efficiently use the available air volume. The powder-coated aluminium construction provides strength while remaining lightweight and durable.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Wheel position varies slightly between models. Combined with different chassis geometries and wheel and tyre combinations, clearance checks may be required. The final quarter of the steering travel should be avoided if the wheel lightly touches at full steering lock.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement air ducts fit in place of the OEM ducts.\u003c\/li\u003e \u003cli\u003eConnects the air duct inlets to the anchor plates via hose connections.\u003c\/li\u003e \u003cli\u003eChannels airflow toward the centre of the brake disc \/ brake rotor.\u003c\/li\u003e \u003cli\u003eUses the turbine effect to cool the brake disc \/ brake rotor from the inside.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMaterial: Powder-coated aluminium\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x air duct inlet for the front left axle\u003c\/li\u003e \u003cli\u003e1x air duct inlet for the front right axle\u003c\/li\u003e \u003cli\u003e1x anchor plate for the front left axle\u003c\/li\u003e \u003cli\u003e1x anchor plate for the front right axle\u003c\/li\u003e \u003cli\u003e2x air hose, 2 metres\u003c\/li\u003e \u003cli\u003e4x hose clamps\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eVehicle Compatibility:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBMW E88 with M Package bumper\u003c\/li\u003e \u003cli\u003eBMW E82 with M Package bumper, excluding the 1 Series M Coupé\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":60084217086238,"sku":"13545","price":1475.97,"currency_code":"AED","in_stock":true}]},{"product_id":"speed-engineering-16538-reinforced-seat-rail","title":"SPEED ENGINEERING 16538 Reinforced Seat Rail","description":"\u003ch2\u003eDescription SPEED ENGINEERING 16538 Reinforced Seat Rail\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 16538 Reinforced Seat Rail is designed for installing a bucket seat. It is intended for compatible seat mounting applications where a stronger seat rail component is required.\u003c\/p\u003e \u003cp\u003eThe seat-rail lever must not be under lateral tension during installation. The lever width must be adjusted according to the seat mounting setup.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReinforced seat rail for bucket seat installation\u003c\/li\u003e \u003cli\u003eDesigned for compatible seat mounting applications\u003c\/li\u003e \u003cli\u003eSeat-rail lever must not be installed under lateral tension\u003c\/li\u003e \u003cli\u003eLever width must be adjusted according to the seat mounting setup\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eApplication: Bucket seat installation\u003c\/li\u003e \u003cli\u003eInstallation Note: Seat-rail lever must not be under lateral tension\u003c\/li\u003e \u003cli\u003eAdjustment Note: Lever width must be adjusted depending on the seat mounting\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":60084217119006,"sku":"16538","price":478.81,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/724021-speed-engineering-16538-1.jpg?v=1792382518"},{"product_id":"speed-engineering-13570-brake-cooling-kit-for-suzuki-swift-rz-az","title":"SPEED ENGINEERING 13570 Brake Cooling Kit for SUZUKI Swift (RZ \/ AZ)","description":"\u003ch2\u003eDescription SPEED ENGINEERING 13570 Brake Cooling Kit for SUZUKI Swift (RZ \/ AZ)\u003c\/h2\u003e \u003cp\u003eThe SPEED ENGINEERING 13570 Brake Cooling Kit is designed for the SUZUKI Swift RZ \/ AZ. The system cools the brakes efficiently using a wear-free hose mounting system.\u003c\/p\u003e \u003cp\u003eThe air inlets replace the fog lights with plug-and-play air intakes to capture maximum airflow at the front of the vehicle. Their curvature supports collision-free hose installation, while wheel position has no effect on hose movement.\u003c\/p\u003e \u003cp\u003eThe cooling system mounts to the wishbone and directs airflow toward the centre of the brake disc \/ brake rotor regardless of wheel position. Installation uses existing locking pins and requires no permanent vehicle modifications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRoad Use:\u003c\/strong\u003e Motorsport parts are not approved for road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \/ Vehicle Compatibility Note:\u003c\/strong\u003e Models vary slightly in wheel position, chassis geometry, and wheel and tyre combinations. In some cases, the wheel may lightly touch at full steering lock, and the final ¼ of the steering travel should be avoided.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for the SUZUKI Swift RZ \/ AZ\u003c\/li\u003e \u003cli\u003ePlug-and-play air intakes replace the fog lights\u003c\/li\u003e \u003cli\u003eWishbone-mounted air duct outlets direct airflow toward the centre of the brake disc \/ brake rotor\u003c\/li\u003e \u003cli\u003eAirflow direction and hose movement remain independent of wheel position\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstallation Position: Front axle\u003c\/li\u003e \u003cli\u003eMounting: Wishbone-mounted air duct outlets with existing locking pins\u003c\/li\u003e \u003cli\u003eHose Length: 2 metres each\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eKit comes with:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1x left air duct outlet\u003c\/li\u003e \u003cli\u003e1x right air duct outlet\u003c\/li\u003e \u003cli\u003e2x air ducts for the air inlets\u003c\/li\u003e \u003cli\u003e2x hoses, 2 metres each\u003c\/li\u003e \u003cli\u003e4x mounting clamps\u003c\/li\u003e \u003cli\u003e4x cable ties\u003c\/li\u003e \u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":60084217151774,"sku":"13570","price":1130.45,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/files\/13570.jpg?v=1791779148"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/0553\/3982\/collections\/logo-speed-engineering.png?v=1696244716","url":"https:\/\/atomic-shop.ae\/collections\/speed-engineering.oembed?page=5","provider":"ATOMIC-SHOP Performance Parts \u0026 Motorsport Equipment - UAE","version":"1.0","type":"link"}